*mydirectindustry

JT10 DIRECTIONAL DRILL

Product catalog summary

Introduction
The JT10 is a high-performance horizontal directional drill powered by a Tier 4, 66-hp (49-kW) Deutz® diesel engine, with an optional Tier 4i version. It is designed for maximum power and efficiency, making it the most powerful drill in its class.

Operator's Station
The operator's station is ergonomically designed with a traversing seat, placing the operator near the center of the pipe rack for easy pipe handling.

Maneuverability
The JT10 is the shortest drill in its class, allowing for easy setup in tight spaces. It features rear ignition for faster jobsite setup.

Design and Strength
The innovative design allows the carriage to travel the length of the drill frame faster than other drills, reducing cycle time and increasing productivity. It provides a pullback force of 10,000 lb (44 kN).

Productivity
The JT10 can hold 324 ft (98.8 m) of drill pipe on board, enabling the completion of utility installations efficiently.

Specifications

Operation: Max spindle speed of 186 rpm, spindle torque of 1,100 ft·lb (1490 N·m), thrust force of 9,000 lb (40 kN), and pullback force of 10,000 lb (44.5 kN).
Power: Tier 4 engine with 66 hp (49 kW) and Tier 4i engine with 48.8 hp (36.4 kW).
Dimensions: Height of 74 in (1.9 m), length of 146 in (3.7 m), width of 49 in (1.24 m), and operating weight of 7,380 lb (3350 kg).
Drilling Fluid System: Onboard pumps with max pressure of 1,200 psi (83 bar) and flow of 20 gpm (76 l/min).
Fluid Capacities: Hydraulic reservoir of 23 gal (87 L) and fuel tank of 18 gal (68 L).
Power Pipe® HD: Drill pipe length of 72 in (1.8 m) and bend radius of 82 ft (25 m).
Battery: Tier 4 battery with SAE reserve capacity rating of 195 min and cold crank rating of 950 amps.

Note
Specifications are subject to change without notice. Equipment should be weighed and measured for exact measurements.

Catalog excerpts

High performance, Tier 4, 66-hp (49-kW) Deutz diesel The JT10’s carriage travels the length of the drill frame engine with optional Tier 4i, delivers maximum power, making faster than other drills in its class for faster cycle time and it the most powerful drill in its class. more pipe in the ground. Newly designed operator’s station features an ergonomic, The strong and durable JT10 gives you 10,000 lb (44 kN) traversing seat, positioning the operator near the center of of sheer pullback force. the pipe rack for easy-to-reach pipe handling. The JT10 holds 324 ft (98.8 m) of drill pipe on board so Shortest drill in its class for easy set up in tight spaces with you can finish all of your utility installations. rear ignition for faster jobsite set up.

Open the catalog to page 1

U.S. METRIC OPERATION Spindle speed, max 186 rpm Ground travel speed Forward 2.4 mph 3.9 km/hr DRILLING FLUID SYSTEM (ON BOARD) 20 gpm pump Pressure, max 1,200 psi 83 bar Fluid tank capacity 8 gal 30.28 L Fluid tank capacity 40 gal 151 L 2.9 L 92 mm 110 mm 49 kW EU Stage IIIB FLUID CAPACITIES Hydraulic reservoir 23 gal 87 L POWER PIPE® HD Length of drill pipe, nominal 72 in 1.8 m Diameter of drill pipe, tool joint end 2 in 51 mm Diameter of drill pipe 1.58 in 40 mm Weight of drill pipe, lined 29 lb 13 kg POWER (TIER 4) Engine Fuel Cooling...

Open the catalog to page 2

All The Charles Machine Works, Inc catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list