FM5X FLUID MANAGEMENT SYSTEM Powered by a 5-hp Honda engine with a standard A new wet hopper design, increasing the venturi inlet from 1.25 to 2 inches—a 60 percent larger opening for material to match the needs of smaller diameter, short-distance flow and superior fluid mixing. Steep sides incorporated in utility installation jobs. design to help speed mixing cycles. Flexible pump mounting offers a variety of setup FM5X features a narrow-tank design, allowing the unit to configurations to meet the needs of small-diameter easily be positioned side-by-side with a drill unit on a trailer for easy jobsite transportation and reduced jobsite costs. Features a high-performance Flomax pump, delivering Features powder-coated finish, making the unit more 160-gpm (606-l/min) of flow, and operates up to 10 percent durable, economical and resistant to chips, rusting more efficiently than previous models. FLUID MANAGEMENT SYSTE

DIMENSIONS U.S. Weight, full of water 3,164 lb FLUID/MIXING SYSTEM Centrifugal pumps Suction port diameter 2 in Discharge port diameter 2 in Pump discharge rate, water, max 160 gpm Drilling fluid tank capacity 300 gal Solids addition rate 50 lb/min Mixing hopper capacity 1 ft3 Fuel Gasoline Cooling medium Air Manufacturer's net power rating 4.8 hp 3.6 kW Emissions compliance EPA Phase 3 EU Stage lV FLUID CAPACITIES Fuel tank 0.95 gal 3.6 L NOISE LEVEL Sound pressure 91 dbA per IS06394 Specifications are general and subject to change without...