*mydirectindustry

FM13X FLUID MANAGEMENT

Product catalog summary

Introduction
The FM13X Fluid Management System is designed to enhance performance and efficiency in utility-installation jobs. It is powered by an 11.7-hp engine and offers options for a 500-gallon or 950-gallon tank, supporting all sizes of HDD drill units.

Key Features and Benefits

Power and Performance: Equipped with a high-performance Flomax® pump, it delivers 200-gpm of 42-viscosity drilling fluid.
Efficiency: The system features a one-piece mixing jet capable of handling 8 bags, producing up to 950 gallons of fluid in under 8 minutes.
Design: A new wet hopper design with a larger venturi inlet improves material flow and fluid mixing. Steep sides aid in speeding up mixing cycles.
Operation: The tank's sloping bottom ensures effective mixing and fluid flow through the pump.
Durability: A powder-coated finish enhances durability, making the unit resistant to chips, rust, and fading.

Specifications

Dimensions: The system is available with two tank sizes, each with specific dimensions and weights.
Fluid/Mixing System: Features centrifugal pumps with a maximum fluid pressure of 50 psi and a pump discharge rate of up to 270 gpm.
Power: Powered by a Honda® GX390 engine, it runs on gasoline with a rated speed of 3,600 rpm.
Fluid Capacities: Includes a 6-gallon fuel tank and 1.2 qt engine lubrication oil capacity.
Noise Level: Sound pressure is measured at 92 dbA, with sound power at 105 dbA.

Conclusion
The FM13X Fluid Management System is engineered for efficiency and durability, making it suitable for mid-size utility-installation jobs. Its customer-driven design and high-performance features ensure increased productivity and effective operation.

Catalog excerpts

FM13X FLUID MANAGEMENT SYSTEM Powered by an 11.7-hp engine equipped with an optional Includes a new wet hopper design, increasing the venturi inlet from 1.25 to 2 inches—a 60 percent larger opening the needs of mid-size utility-installation jobs. Supports all for material flow and superior fluid mixing. Steep sides sizes of HDD drill units. incorporated in design to help speed mixing cycles. Features a high-performance Flomax ® pump, delivering The tank’s sloping bottom ensures unit effectiveness, allowing drilling fluid to be thoroughly mixed and flow through the pump. E N G IN E E R E D F O R E F F I C IE N C Y A one-piece mixing jet handles 8 bags, yielding up to 950 gallons (3596 L) of fluid in fewer than 8 minutes. Features powder-coated finish, making the unit more durable, economical and resistant to chips, rusting or fading. FLUID MANAGEMENT SYST

Open the catalog to page 1

Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. BDitchWitch ditchwitch.com ©2018 The Charles Machine Works, Inc.

Open the catalog to page 2

FM13X FLUID MANAGEMENT

FM13X FLUID MANAGEMENT

Catalog excerpts

All The Charles Machine Works, Inc catalogs and technical brochures