*mydirectindustry

Catalogs
The Charles Machine Works, Inc
C12X WALK-BEHIND TRENCHER

C12X WALK-BEHIND TRENCHER

Product catalog summary

Introduction
The document introduces the C12X Walk-Behind Trencher, highlighting its power, innovative design, reliability, operator-friendly features, trenching superiority, and world-class support.

Key Features/Benefits

Power to Perform: Equipped with a 12-hp (8.9-kW) Honda engine, the trencher can achieve a maximum trench depth of 24 inches, enhancing jobsite performance.
Innovative Design: The patented CX track design improves traction and stability, leading to better production.
Proven Reliability: A robust pivot design with no daily grease points simplifies maintenance and increases uptime.
Operator Friendly: Redesigned ergonomic controls enhance machine responsiveness and reduce operator fatigue.
Trenching Superiority: Utilizes low-maintenance 35K digging systems for optimized production.
World-Class Support: Supported by 170 dealer locations worldwide, offering genuine parts and expert service.

Specifications

Dimensions: Maximum trench depth of 24 inches (609 mm), trench width of 4.3-6 inches (110-150 mm), and overall dimensions of 94 inches (length), 35.8 inches (width), and 57 inches (height).
Power: Features a Honda iGX390 engine with a net power rating of 11.7 hp (8.7 kW), compliant with EPA Tier 4 Final and EU Stage IIIA emissions standards.
Operation: Transit speeds of 120 fpm (36.6 m/min) and digging chain speed of 253 fpm (77 m/min). The auger is single, open-ended, and 17 inches in size.
Hydraulic System: Dual pump capacity of 7.5 gpm (28.4 l/min) with specific pressure and capacity settings for ground and digging drives.
Fluid Capacities: Fuel tank capacity of 1.6 gallons (6.05 L), engine oil capacity of 1.2 quarts (1.1 L), and hydraulic reservoir capacity of 11 gallons (41.6 L).
Noise Level: Sound power level of 101 dBA and sound pressure at the operator's ear of 92 dBA.

Additional Notes
Specifications are subject to change without notice, and exact measurements should be verified if required. The document emphasizes that exceeding specified operating angles can cause engine damage.

Catalog excerpts

enhancing machine responsiveness, and reducing Featuring a 12-hp (8.9-kW) Honda ® engine and a max operator fatigue. Redesigned, easy-touch controls are more ergonomic, trench depth of 24” for better jobsite performance. Utilizes the reliable, low-maintenance 35K digging An exclusive, patented CX track design puts more track systems specifically designed for Ditch Witch trenchers on the ground for better traction while increasing stability Ditch Witch equipment is backed by 170 dealer locations A new, robust and straightforward pivot design and no daily worldwide, each with genuine Ditch Witch parts in stock grease points eases maintenance and increases unit uptime. plus factory-trained service and expert advice.

Open the catalog to page 1

DIMENSIONS OPERATION Trench depth, max (A) 24 in Boom travel down (C) 63° Centerline trench to edge, left (E1) 17.2 in Centerline trench to edge, right (E2) 18.6 in Vehicle speeds Transit forward/reverse Digging chain speed 35K Spoil handling Auger, type Auger, size Operating weight, max HYDRAULIC SYSTEM @ 3600 RPM Engine Fuel Manufacturers net power rating (SAE J1940) Emissions compliance Number of cylinders Displacement Bore Stroke Dual pump capacity 7.5 gpm Pump characteristics to ground drive Pressure, relief valve setting 2500 psi Pump characteristics to digging drive Pressure,...

Open the catalog to page 2

All The Charles Machine Works, Inc catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list