950R/T and 970T Locating Equipment
2Pages

{{requestButtons}}

Catalog excerpts

950R/T and 970T Locating Equipment - 1

DITCH WITCH® ELECTRONICS 950R/T and 970T Locating Equipment A B Location, Location, Location. The 950R/T system is the quickest way to locate buried telephone, CATV, power, gas, and water lines. In active mode, the 950T and 970T offer simultaneous 8 and 29 kHz transmission to make an alternate signal available if one is hard to detect. In passive mode, the 950R detects signals generated by 31 kHz (CATV) and 50/60 Hz power, as well as re-radiated radio frequencies. And in beacon mode, the 950R detects signals from optional beacons to locate non-metallic service lines. KEY FEATURES (Photograph A) 950R/T offers simultaneous 8 and 29 kHz transmission, so an alternate signal is available if one is hard to detect; 80 kHz frequency is helpful in locating old tracer wires and pipes with insulators. The 970T can transmit all 950T frequencies plus a 200-kHz frequency for more difficult locates. In active mode, the 950T and 970T transmit via direct-line connection, induction clamp or induced broadcast signals. 970T’s best-in-class 5-watt output and 80-hour battery life help provide maximum productivity. (Photograph B) 970T is equipped with built-in circuit protection, reverse battery protection, and live wire hookup protection for exceptional reliability. Enhanced backlit LCD of the 950R/T and 970T offers optimal visibility in low-light conditions. ditchwitch.com

Open the catalog to page 1
950R/T and 970T Locating Equipment - 2

EJ DITCH WITCH* ELECTRONICS 950R/T AND 970T LOCATING EQUIPMENT Operating weight Operating temperature range Maximum power output Operational frequencies Battery type Battery life Battery saver Approximately 40 hours (continuous use at power level 2) Unit runs continuously or shuts off after running for selected hour interval (8-hour maximum) Operating weight Operating temperature range Operational frequencies Passive (standard) Passive (optional) Active other (optional) Beacon (non-roll) Audio output Antenna configurations Single peak, twin peak, null, left/right Depth estimate tolerances*...

Open the catalog to page 2

All The Charles Machine Works catalogs and technical brochures

  1. AT32

    1 Pages

  2. MT9

    1 Pages

  3. HX30

    2 Pages

  4. Air hammer

    3 Pages

  5. TK RECON™

    2 Pages

  6. HDD Beacons

    2 Pages

  7. HDD PARTS

    47 Pages

  8. CX SERIES

    1 Pages

  9. C SERIES

    1 Pages

  10. 250 R/T

    1 Pages

  11. TOOLS

    1 Pages

  12. FILTERS

    1 Pages

  13. DURATOOTH

    8 Pages

  14. ACCESSORIES

    1 Pages

  15. 2450GR

    2 Pages

  16. 250RT

    2 Pages

  17. 150R/T

    2 Pages

  18. TMS Plus

    2 Pages

  19. ALL TERRAIN

    16 Pages

  20. ZAHN BACKHOE

    15 Pages

  21. RT 80 Quad

    2 Pages

  22. RT/HT TRACTORS

    16 Pages

  23. RT TRACTORS

    12 Pages