*mydirectindustry

250 R/T

1 / 1 PageView full catalog

250 R/T

Product catalog summary

Specifications Overview

250r Receiver:
- Dimensions: Height 27.5 in (700 mm), Length 11.5 in (290 mm), Width 4 in (100 mm)
- Weight: 5 lb (2.3 kg)
- Dynamic Range: 146 dBa
- Operating Temperature: -4 to 122°F (-20 to 50°C)
- Antenna Configurations: Twin peak
- Audio Output: Speaker
- Operating Modes: Active line 33 kHz, Passive line 50/60 Hz (no depth), Beacon 33 kHz (locate/depth only), Radio Passive locate (no depth)
- Locating Ranges: Line 15 ft (4.6 m), Beacon 10 ft (3 m)
- Depth Ranges: Active line ±5% (0.5-10 ft/0.15-3 m), Active line ±10% (10 ft and deeper/3 m and deeper), Beacon ±5% (0.5-10 ft/0.15-3 m)
- Display: LCD backlight
- Battery: 6 C-cell alkaline, Life ~40 hours, Battery saver shuts off after 5 minutes of inactivity
250T Transmitter:
- Dimensions: Height 9.25 in (235 mm), Length 12.25 in (311 mm), Width 4.5 in (114 mm)
- Operating Weight: 5 lb (2.3 kg)
- Operating Temperature: -4 to 122°F (-20 to 50°C)
- Power Output: Max 1 watt
- Operating Modes: Active line 33 kHz
- Battery: 6 D-cell alkaline, Life ~150 hours, Battery saver shuts off after 5 minutes of inactivity

Additional Notes:

Locators are calibrated under ideal conditions; actual conditions may affect performance.
Specifications are subject to change without notice.
For precise measurements, equipment should be weighed and measured.

Catalog excerpts

Operating weight Operating temperature range Dynamic range Operating temperature range Antenna configurations Twin peak Audio output Operating modes Active line Operating modes Battery type Passive line Passive locate, no depth available Unit shuts off after 5 minutes of inactivity Beacon (locate/depth only) Approximately 150 hours (continuous Battery saver Battery life Active line Locating ranges Line Battery type Battery life Approximately 40 hours (continuous use at 70°F/21°C) Battery saver Unit shuts off after 5 minutes of inactivity * Locators are calibrated to these tolerances under ideal test field conditions. Acutal operating field conditions may have signal distortions or may contain noise sources, which result in depth range that is less than specified. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.

Open the catalog to page 1

All The Charles Machine Works, Inc catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list