E DITCH WITCH® ELECTRONICS With only four buttons and an easy-to-read display, the 150R receiver is simple to operate; all locating information is at your fingertips. Rugged, water-resistant housings stand up to extreme jobsite conditions. 150R/T system comes complete with a convenient By helping to verify the underground facility's location, the 150R/T can help prevent damage during excavation. Optional beacons help you trace water, sewer, or drain lines with ease. Weighing just over 5 lb (2.3 kg), the lightweight, compact 150R/T is as easy to carry as it is to operate. Both the 150R receiver and the 150T transmitter operate using consumer C-cell alkaline batteries. System is backed by superior quality service and support, all available from the worldwide network of Ditch Witch® dealers. Pre-bundled packages and color-coded components make the 150R/T system easy to buy—just pick your frequency at the

E DITCH WITCH® ELECTRONICS Operating weight Operating temperature range Antenna configurations Peak, null Audio output Recommend depth ranges* 640 beacon in cast iron 30k active (direct connect) 83k active (direct connect) Batter type Battery life Approximately 40 hours (continuous use at 70° F/21° C) Battery saver Unit shuts off after 5 minutes of inactivity Operating weight Operating temperature range Maximum power output Operating modes Battery type Battery life Approximately 40 hours (continuous use at 70° F/21° C) Operational Frequencies Beacon (non-roll) "Locators are calibrated to these...