CHANKO-Light optical sensor CX6-DN30
2Pages

III. Keep Running, Adjust By Moving Detection Object VI. Threshold Fine-Tuning 0CH0NKD CX6-DDD0-D Intelligent Optical Fiber Sensor Operating Instruction Setting • Automatic Adjustment © Continue to press button jojj when state of no detected object, and make the detection object pass during the period from (IPnt) to (FULL) to (Auto). (state of detection the object, press button Joj for more than 7 seconds until the red digital display (Auto). After state completely passed the detection, please release ]oj . © Hi H( UP/DOWN ) Button setting. Note: continuous push button for high speed adjustment Thanks for purchasing this product. In order to use this product correctly, please read the safety precautions carefully before use. The matters needing attention specify the relevant safety content. Please operate according to the relevant safety content. SHANGHAI CHANGJIANG ELECTRIC EQUIPMENT GROUP CO., LTD. A Warning • In order to ensure the safe operation of the machine, it is necessary to supply electricity with a fixed amount of power source. • This product does not belong to explosion-proof structure. Do not use it in flammable or explosive environment. • This product should not be used for human protection devices and human testing purposes. Notice • Do not use in places where water, oil or chemicals are used. • Do not use in direct sunlight. • Do not use in places with corrosive gas. • Do not use in places with strong electric and magnetic fields. • Do not use in places where vibration and shock exceed the rated range. • Do not use in places with high temperature and easy condensation. • Do not use in case of damaged shell. • Please correctly connect the load. • Do not load short circuit, otherwise it will lead to damage, cause fire danger. • Please pay attention to the polarity of the power supply to prevent wrong wiring. • Please separate the sensor from the high-voltage line and power line. If the same line is used, it will induce each other and cause wrong action or damage. ■ Do not disassemble, repair or modify this product without permission. Specification Series Input-Output Circuit Diagram CX6 Series ■BROWN +V ■ BLACK V-fLcAo ■ BLUE 5-0V <0 Main Control Circuit VII. Convenient Setting + : Press simultaneously : Press simultaneously in order Note: The adjustment range of the intelligent adjustment is about 20-1/100 times. When the detection function is selected as GIGA mode, the range of adjustment is about 2 ~ 1 / 100 times because the initial value is large. To change the level of light volume, browse for "VIII. Detail Setting" 3. Setting initialization • Setting initialization Initialize all settings and return to factory state. © Press the state of button and button jjj (L/D) for more than 3 seconds. © Select (rSt) through fiTD (UP/DOWN) and press (gj(MODE) button. © Select (rSt init) through HI H (UP/DOWN)and press f§j(MODE) button. Note: please note that pressing jj (L/D) button will cause output inversion. Continue to press more than 3 seconds at the same Item * Other functions for the detailed set state intelligent adjustment

4. Want to save / read settings • User Saving Save current Setting © Press the state of button [0 press (L/D) button 0 for more than 3 seconds. © Select o (SAvE) through EB(UP/DOWN) and press button ||. (|) Select EB (SAvE Yes) through EB (UP/DOWN)and press 0 (MODE). • User Setting Read the saved settings © Press the state of button g andbutton Q(L/D)for more than 3 seconds. © Select (rSt) through IL -I (UP/DOWN) and press || button © Select (rSt USEr) through (UP/DOWN) and press button — . Note: please note that pressing the 0 (L/D) button first will cause output inversion 5. Prevent...