Catalogs >
Changzhou Tonghui Electronic Co., Ltd. >
Tonghui Transformer Tester TH2829X

Tonghui Transformer Tester TH2829X
3Pages

Catalog excerpts

B. ITH2829X Series Automatic Transformer Test System TH2829AX Series Features ■ 7-inch 16:9 TFT LCD display with a resolution of 800*480 ■ Simple and elegant appearance ■ Easy and flexible panel operation ■ Up to 1MHz test frequency, 0.5mHz resolution ■ Signal amplitude range: 5mV to 10Vrms, 100gV resolution ■ Test speed is up to 75meas/sec. ■ Wider impedance test range and better stability for small-signal test ■ Built-in 0-100mA/0-10V bias source (standard) or 1A bias source (optional) ■ Diode P/N characteristic detection can test all parameters of network transformer. ■ Improved high turn ratio and weak coupling transformer test ability ■ Improved DCR test ability for low-ohm winding ■ One screen is enough to show all test results. ■ To display one or two groups of primary and secondary parameters is selectable in LCR test. ■ Compatible with TH1901 and TH1805 20-pin transformer scanning fixtures ■ Flexible time-labeling system: time of file setting, calibration and deduction can be saved. ■ Sort the selected scanning parameters ■ Self-test scanning fixture relays and ensure they work well. ■ Flexible deviation and deduction modes ■ Multiple handling ways for FAIL cases ■ Single parameter test cycle can be used to test a separate winding. ■ Two separate passwords for administer and operator can improve test security and reliability. ■ Internal memory for up to 200 setting files and external USB memory for more ■ Test data and graphs can be saved as CSV, GIF format to USB memory. ■ The built-in software provides analysis abilities, such as Cpk, Cp and Ck. ■ Bar-code reading function can be used to select a setting file or to manage the type of test products. ■ Search functions such as file search, fuzzy search, accurate search, code-bar search are available. ■ Parameter setting files are compatible with TH2818X/ TH2819X. ■ To program setting files through PC ■ To upgrade operation softwares of USB HOST and RS232C online ■ Multiple interfaces are optional for PC communication. ■ To network multiple testers through LAN interface Brief Introduction Most switching transformer and network transformer manufacturers have an urgent need for a transformer test system that can achieve more functions, high efficiency and accurate test. On the basis of thorough market research and analysis, advanced impedance test technology and rich experience on the development of TH2818X&TH2819X automatic transformer test system, Tonghui has launched a new series of automatic transformer test system—TH2829X series which combines faster test speed, higher accuracy and efficiency. TH2829X will be a great assistant for your transformer tests.

Open the catalog to page 1

Transformer,Motor and Winding Test Instruments B. TH2829X Series Automatic Transformer Test System 20-Pin Transformer Scanning Test +LCR Test (Optional) TH2829X provides a 10-hour function-experience for LCR test. The experience version will be automatically turned off after 10 hours of using. If you do need this function, please contact our salesmen or distributors and provide your detailed instrument serial number. Warm-up time ≥ 30 minutes, Environment temperature: 23±5ºC, Signal voltage: 0.3Vrms – 1Vrms Zeroing: After OPEN or SHORT Length of test cable: 0 m Basic accuracy (See operation...

Open the catalog to page 2

BJTH2829X Series Automatic Transformer Test System TH1805A/B scanning test fixtures TH1805AIB Ordering Information TH2829AX/TH2829BX/TH2829CX Automatic Transformer Test System Transformer scanning control cable Foot switch Gilding short board Manual transformer scanning fixture Instrument Accessories TH26005B 4-terminal test fixture TH26011A 4-terminal Kelvin test clip leads TH26004B 2-terminal test clip leads

Open the catalog to page 3

Tonghui Transformer Tester TH2829X 3Pages

Catalog excerpts

All Changzhou Tonghui Electronic Co. catalogs and technical brochures

Tonghui Transformer Tester TH2829X
3Pages