Precision Micro-Flow Squeeze Valve Concentric Screw Valve KEV���� precision micro-flow squeeze valve is used to realize the dispensing application of ultra-fine solder paste (T�/T�) with a dot size of ���μm or smaller, and is suitable for dotting or scribing operation of high viscosity fluids such as solder paste; the valve is provided with a constant-temperature control system to effectively guarantee the properties of the solder paste and ensure the stability of the dispensing effect. KSV���� series is a screw valve for quantitative conveying and dispensing of media containing particles and medium and high viscosity media. The valve body can be provided with screws of different specifications to cover applications with different flow and glue amount requirements. The valve body adopts a quick release design, which is convenient for quick cleaning and maintenance. The squeeze valve adopts the principle of squeezing glue from the flexible air bag, so Features and Advantages Syringe guide installation design, suitable for ��cc/��cc/��cc syringes, and quick minimum dot diameter of T� solder paste can be up to ��μm. Extremely wear-resistant screw which is made of tungsten steel. The squeeze valve is especially suitable for solder paste dispensing, and the Possible to deal with most of low, medium and high viscosity glues. Provided with a closed-loop servo motor to achieve precise positioning and fault detection. UV Thermosetting Adhesive Thermal Grease Thermal Gel Application Fields Camera AA Process Dispensing Thermal Conductive Material Coating for Semiconductor MEMS Solder Paste Dispensing Lens Bonding Optics, Induction and Sensor the small air pressure drive can realize the fine gluing control.