MINGSEAL TECHNOLOGY Piezoelectric Valve Jetting System Auxiliary enhanced version of ADJ calibration function and repeAfter routine cleaning and assembly, jetting can be done directly without ADJ calibration, and the process recovery time is less than � minutes.atability of �.��mm. With unique structure and control design, the minimum dispensing diameter of �.�mm can be achieved, dispensing can be done in a narrow gap of �.�mm, and the minimum dot volume can be up to �.�nL. It can be integrated with various dispensing systems to achieve high output and high consistency. With modular design, special glue such as anaerobic glue and hot melt glue can be jetted after corresponding modules are replaced or added. Consumables and usage costs can be reduced effectively. Typical Applications Ball Grid Array (FC BGA) and Chip Scale Packaging (FC CSP) Underfill Wafer Level Packaging Automotive Electronics Corner and Edge Connection Compact Camera Module (CCM) Flexible Circuit Board Package on Package (PoP) Underfill Display Screen Flip Chip (FC ) Underfill Micro Speaker and Micro Receiver High-Density Printed Circuit Board (PCB) Underfill Voice Coil Motor (VCM) and Vibration Motor Conductive Epoxy Resin Parameter Quantification Control Ability The scale quantification of adjustment components is increased, and the adjustment amount per scale is �.��mm. Lower Usage Costs With integrated design of nozzle seat, � sealing ring + � nozzle sealing seat + � installation tool are reduced to decrease maintenance and usage costs. Applicable Fluids Epoxy Glue Thermosetting Adhesive Corrosive Glue Silver Glue Semiconductor, Precision Electronics and Automotive Electronics Faster Process Recovery Capability Application Fields The nozzle and tappet structure design is more optimized; in combination with smooth trapezoidal wave control technology, the glue scattering rate is <�.�% to achieve good bubble control. The parameters can be quantified and the adjustment is simple and convenient, so that it can be used widely. Core Components Stable and Consistent Dispensing With nozzle calibration function, the nozzle sleeve can be replaced within � minute, and the glue amount accuracy can be controlled within ±�% (depending on different glues). Surface Mount KPS���� series piezoelectric jetting valve is a new generation of high-speed, precision and non-contact jetting system which can deal with low, medium, high and ultra-high viscosity media; configurations such as UV type, corrosion-resistant type, PUR type and anti-corrosion type are available according to different application media. The tappet guide seat is directly connected with the runner thread, and the coaxial and guiding design of the guide seat and the runner is added; the coaxiality of the tappet and the nozzle is improved to ensure continuously stable dispensing. The jet force of the valve body is increased by ��%, and higher-viscosity glue (up to ������cps) can be supported. PJS Series It can be widely used for non-contact dispensing operations in such fields as semiconductor packaging and mobile electronic equipment assembly. It can be used with dispensing machines or automatic production lines to achieve high-s