Aluminum desktop enclosure 01A
8Pages

Aluminum construction Top and bottom cover sparied plastic simple assembly Application from desktop to rack mount(type 01B) Custom colors available Wide range of enclosure size Special assembly sevices Height/Width Chart Depth Chart Rear panel Overall Depth Note: Custom depth available

Extrusions Front horizontal rail • Material: Aluminum extrusion • Spary plastic • With or without pre-punched holes for card guide available

Side plate • • • • • Material: Aluminum extrusion Optional depth according to case size Spary plastic Without decorative panel for 2U height Pre-punched holes for mounting side mounting plate or additional horizontal rail Optional Accessories Handle • • • • • Material: Die-cast aluminum Choice of 5 types of handles With mounting flange for 01B and 01M Spary plastic,custom colors available View the below illustrative chart to check the corresponding model of enclosures for

Material: Aluminum extrusion Clear anodized Threaded holes for installation of PCB Bottom mounting plate • • • • Material: 1.5mm or 2mm Aluminum sheet Choices of two style (style A and style B) Fixing onto front rail and rear rail for style A Fixing onto two side plate for style B Demensions chart Chart 1 (For style A) u(mm)×v(mm) Width

Card guide Plastic card guide(PC) body of card guide (aluminium exrrusion) Choices of two style of card guide (plastic or aliminum extrusion) moulded in PC for plastic card guide Optional length for aluminum extrusions card guide Suitable for 1.6mm to 2.0mm nominal thickness Custom colors available Panel of plug-in unit • Material :2mm alminium sheet ,Clear anodized • Quick locks screw into the slide nuts pluged in front rail or rear rail • With "V" drag • Optional size of panel, also cut-outs in the panel available

Front view of box (remove front panel) Side view of box (remove front panel) Threaded strip • Material: Stainless steel • With threaded holes (pitch of 5.08mm) • Replacement of slide nuts as standard version • For mounting front or rear panel • Material: PC • Choices of four style • Style A as standard version

Material: 2mm Aluminum sheet Clear anodized available Refer to page 1 for the dimensions of front and rear panel Customization services Cut-outs in the front and rear panel Special vent holes in the decorative panel and side plate Secondary tooling for top and bottom cover Strengthen enclosure by mounting additional extrusion,which can be used for intallatoin of backplanes Specify the non-standard colors (you may provide us with the card of your desired color) refer to our web site for the standard vers

It is very simple ordering 01A series enclosures of Changhe Just pick up the phone and call your local Changhe office (View our web site http://www. enclosures .com.cn to get the adress of Changhe enclosures, also dial us at 86-574-63028237) • inform us the model of your enclosure to order • Inform us the desired overall heght(H), overall width(W) and depth(T) * see the chart on page 1 for definitions of H, W and T • Optional accessories should be separately ordered • Specify us your desired color of enclosure *see our website to view various of colors configuration • You should send us the...