01C/01D series
12Pages

Aluminum construction Top and bottom cover sparied plastic simple assembly Custom colors available Wide range of enclosure size Special assembly sevices Height/Width Chart Exterior size Height of side plate Overall height Interior size Overall width Inside Height Inside Width Panel size Note: Cust

PART QTY DESCRIPTION Top cover 1 Aluminium sheet,spary plastic Frame 2 Diecast aluminium,spary plastic,the front and rear frame is the same one Horizontal rail 4 Aluminium extrusion,clear anodized, pre-punched holes for card guide Side plate 2 Aluminium extrusion,clear anodized Bottom cover 1 Aluminium sheet,spary plastic,with two array of vent holes Bottom foot 4 Moulded in PC,with rubber pad,including 2 pcs of supporting foot Extrusions Horizontal rail Length table HP 42 63 Length(mm) 218 325 Material: Aluminum extrusion Clear anodized With or without pre-punched holes for card guide availa

Side plate • • • • Material: Aluminum extrusion Optional depth according to case size Clear anodized Pre-punched holes for mounting side mounting plate or additional horizontal rail Optional Accessories Plug bar Material: Aluminum extrusion Clear anodized Threaded holes for installa

Bottom mounting plate • • • • Material: 1.5mm or 2mm Aluminum sheet Choices of two style (style A and style B) Fixing onto front rail and rear rail for style A Fixing onto two side plate for style B Demensions chart Chart 1 (For style A) Width

Card guide body of card guide (aluminium exrrusion) Plastic card guide(PC) Length of plastic card guide LC(mm) 143 210 LH(mm) 123 183 H P(mm) Choices of two style of card guide (plastic or aliminum extrusion) moulded in PC for plastic card guide Optional length for aluminum extrusions card guide Suitable for 1.6mm to 2.0mm nominal thickness Custom colors available Panel of plug-in unit • • • • • Material :2mm alminium sheet ,Clear anodized Quick locks screw into the slide nuts pluged in front rail or rear rail With "V" drag Optional size of panel, also cut-outs in the panel available on...

Quick lock Fixing base for PCB Panel of plug unit Demensions chart for box H HB(mm)

Mid-Rail Length table HP 42 63 Length(mm) 218 325 Rear foot Material: Diecast aluminum Spary plastic Size of the rear panel will change if rear feet are mounted Material: Aluminum extrusion Clear anodized With or without pre-punched holes for card guide available suitable for installation of

Material: 2mm Aluminum sheet Clear anodized available Refer to page 1 for the dimensions of front and rear panel Cut-outs in the front and rear panel available Threaded insert • • • • Material: Stainless steel With threaded holes (pitch of 5.08mm) Replacement of slide nuts as standard version For mounting front or rear panel Bottom feet • • • Material: PC Choices of four style Style A as standard version Style A (the smaller cubic feet) Style C (the bigger cubic feet) Style B (middle cubic feet)

Choice of three models of handle Can be revolved about the axis as left drawing every other 30 degree Bearing capability of 30kg The model for enclosure with handle i

Customization services Customization of The bigger size enclosures (from 5U to 9U) The details for dimensions as following chart. See page 1 for definitions of different dimensions Height/Width Chart Exterior size Height of side plate Overall height Cut-outs in the front and rear panel Interior size Overall width Inside Height Inside Width Panel size Panel mounting size m(mm) Special vent holes in the top cover and side plate

Vertical application,with Drag available Special assembly services Specify the non-standard colors (you may provide us with the card of your desired color) refer to our web site for the standard version

How to order It is very simple ordering 01C/01D series enclosures of Changhe Just pick up the phone and call your local Changhe office (View our web site http://www. enclosures .com.cn to get the adress of Changhe enclosures, also dial us at 86-574-63028237) inform us the model of your enclosure to order Inform us the desired overall heght(H), overall width(W) and depth(T) * see the chart on page 1 for definitions of H, W and T Optional accessories should be separately ordered You must specify the model of handle for 01D (without handle for 01C) Specify us your desired color of enclosure...