MPL-N-355/30~60uJ/150~550mW Wavelength (nm) LD PUMPED ALL-SOLID-STATE UV LASER 355±1 Output average power (mW) 150~550 Transverse mode Near TEM00 Operating mode Frequency conversion of Q-switched pulsed laser 30~60 Pulse duration (ns) ~7 Peak power (kW) All solid state 355nm UV laser is made features of ultra compact, long lifetime, low cost and easy operating, which is widely used in UV curing, micro-electronics, CD carving, laser medical treatment, scientific experiment, etc. Single pulse energy (µJ) ~10 Rep. rate (kHz) Undefined rep. rate among 5k-15kHz and unstable laser pulse emitting. Suitable for the applications only needing high peak power pulses. Average power (mW) Average power (mW) = Single pulse energy (µJ) * Rep. rate (kHz) Ave power stability (over 4 hours) <5%, <10% Warm-up time (minutes) <10 Beam height from base plate (mm) 68.2 Operating temperature (℃) 10~35 Power supply (90-264VAC) PSU-H-LED Cooling system Cooled by TEC and air, no water needed. PSU-H-FDA Expected lifetime (hours) 8000 Warranty period 1 year Remarks Please Note: because of the Walk-off effect of Nonlinear crystals, the beam quality of UV laser is not so good as that of 1064/532nm laser. MPL-N-355 PSU-H-LED PSU-H-FDA 240(L)×99(W) ×94(H) mm3, 2. 6 kg 268 (L) ×145(W) ×106 (H) mm3, 2.6 kg 238 (L) ×146(W) ×102 (H) mm3, 2.3 kg Website: http://www.cnilaser.com E-mail: [email protected] Tel: +86-431-85603799 UV prism Fax: +86-431-87020258