Catalogs >
Changchun New Industries Optoelectronics Tech.Co., >
MPL-H-1064 All solid state Q-switched laser from CNI

MPL-H-1064 All solid state Q-switched laser from CNI
1Pages

Catalog excerpts

MPL-H-1064 All solid state Q-switched laser from CNI - 1

Operating mode All solid state Q-switched laser at 1064nm has the features of high peak power, high repetition rate, and short pulse duration, which is widely used in industry (marking on the diamond or stone), teaching of nonlinear optics, experiments of generating 355nm, or 266nm laser, fiber communication, etc. Single pulse energy (µJ) LD PUMPED ALL-SOLID-STATE Q-switched LASER Q-switched pulsed laser 3~10 ~25 Specified One rep. rate, such as 1k, 2k, 3k, up to 4kHz, with stable laser pulses emitting (stable pulse energy, peak, duration and period). Different rep. rate in the range of 1Hz-4kHz can be obtained by input an external TTL signal. Controllable Rep. rate (kHz) Uncontrollable Average power (mW) Undefined rep. rate among 5k-30kHz and unstable laser pulse emitting. Suitable for the applications only needing high peak power pulses. Average power (mW) = Single pulse energy (µJ) * Rep. rate (kHz) Ave power stability (over 4 hours) Transverse mode Warm-up time (minutes) Beam divergence, full angle (mrad) Beam diameter at the aperture (mm) Beam height from base plate (mm) Expected lifetime (hours) 1 year UV laser at 266nm or 355nm can be generated by MPL-H-1064 or MPL-H-532 by frequency doubler. Website: http://www.cnilaser.com E-mail: sales@cnilaser.com

Open the catalog to page 1