1. Catalogs
  2. Changchun New Industries Optoelectronics Tech.Co.,
  3. MLL-H-1064 low noise infrared laser from CNI
video corpo

MLL-H-1064 low noise infrared laser from CNI

MLL-H-1064 low noise infrared laser from CNI

Product catalog summary
Low Noise Infrared Laser at 1064 nm
This document provides technical specifications for a low noise infrared laser operating at 1064 nm. The laser is designed for use in scientific experiments, optical instruments, sensors, measurement, communication, and spectrum analysis. Key features include ultra-compact design, long lifetime, low cost, and ease of operation.
Specifications:
  • Wavelength: 1064±1 nm
  • Output Power: Options available from >2000 mW to 3000 mW
  • Transverse Mode: Near TEM00
  • Operating Mode: Continuous Wave (CW)
  • Power Stability: Less than 1%, 3%, or 5% over 4 hours
  • Amplitude Noise: Less than 1% (rms, 20Hz~20MHz)
  • Warm-up Time: Less than 10 minutes
  • M2 Factor: Less than 2.0
  • Beam Divergence: Full angle less than 2.0 mrad
  • Beam Diameter at Aperture: Approximately 3.0 mm
  • Beam Height from Base Plate: 29 mm
  • Polarization Ratio: Greater than 100:1
  • Pointing Stability After Warm-up: Less than 0.05 mrad
  • Operating Temperature: 10 to 35 ℃
  • Power Supply: Compatible with PSU-H-LED, PSU-H-FDA, PSU-H-OEM
  • Expected Lifetime: 10,000 hours
  • Warranty Period: 1 year
Dimensions and Weight:
  • 153(L)×77(W)×60(H) mm, 0.9 kg
  • 268(L)×145(W)×106(H) mm, 2.6 kg
  • 238(L)×146(W)×102(H) mm, 2.3 kg
  • 238(L)×146(W)×94(H) mm, 2.2 kg
See more

Catalog excerpts

MLL-H-1064 low noise infrared laser from CNI-1

LOW NOISE INFRARED LASER AT 1064 nm All solid state low noise infrared laser at 1064 nm is made features of ultra compact, long lifetime, low cost and easy operating, which is used in scientific experiment, optical instrument, optical sensor, measurement, communication, spectrum analysis, etc. Transverse mode Operating mode Power stability (rms, over 4 hours) Warm-up time (minutes) Beam divergence, full angle (mrad) Beam diameter at the aperture (mm) Beam height from base plate (mm) Polarization ratio Pointing stability after warm-up (mrad) Expected lifetime (hours) Warranty period Website: http://www.cnilaser.com E-mail: [email protected]

 Open the catalog to page 1

All Changchun New Industries Optoelectronics Tech.Co., catalogs and technical brochures

  1. FC-NL series

    1  Page

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.