1. Catalogs
  2. Changchun New Industries Optoelectronics Tech.Co.,
  3. MDL-III-830L Infrared diode laser at 830nm from CNI
video corpo

MDL-III-830L Infrared diode laser at 830nm from CNI

MDL-III-830L Infrared diode laser at 830nm from CNI

Product catalog summary
Product Overview: The MDL-III-830L is an infrared diode laser operating at 830nm, known for its round spot, long lifespan, low cost, and ease of operation. It is commonly used in measurement and spectrum analysis.
Specifications:
  • Wavelength: 830±10 nm
  • Output Power: Options range from >1 mW to 120 mW
  • Spectral Line Width: Less than 0.5 nm
  • Transverse Mode: Near TEM00
  • Operating Mode: Continuous Wave (CW)
  • Power Stability: Less than 1%, 3%, or 5% over 4 hours
  • Warm-up Time: Less than 5 minutes
  • Beam Divergence: Full angle less than 1.0 mrad
  • Beam Dimensions at Aperture: Approximately 3.0 mm
  • Beam Height from Base Plate: 24.8 mm
  • Operating Temperature: 10 to 35°C
  • Power Supply: Compatible with PSU-III-LED, PSU-III-FDA, PSU-III-OEM
  • Modulation Options: TTL/Analog with frequencies of 1Hz-5KHz, 1Hz-10KHz, 1Hz-30KHz, and TTL on/off
  • Expected Lifetime: 10,000 hours
  • Warranty: 1 year
Dimensions and Weight:
  • 139(L)×73(W)×46.2(H) mm, 0.6 kg
  • 154(L)×155(W)×95(H) mm, 1.5 kg
  • 133(L)×130(W)×65(H) mm, 1.2 kg
  • 100(L)×62(W)×56(H) mm, 0.2 kg
See more

Catalog excerpts

MDL-III-830L Infrared diode laser at 830nm from CNI-1

INFRARED DIODE LASER AT 830nm Transverse mode Operating mode Infrared diode laser at 830nm is made features of round spot, long lifetime, low cost and easy operating, which is widely used in measurement, spectrum analysis, etc. Spectral line width (nm) Power stability (rms, over 4 hours) Warm-up time (minutes) Beam divergence, full angle (mrad) Dimensions of beam at the aperture (mm) Beam height from base plate (mm) Modulation option Expected lifetime (hours) Website: http://www.cnilaser.com E-mail: [email protected]

 Open the catalog to page 1

All Changchun New Industries Optoelectronics Tech.Co., catalogs and technical brochures

  1. FC-NL series

    1  Page

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.