1. Catalogs
  2. Changchun New Industries Optoelectronics Tech.Co.,
  3. CNI/AO-W-266/All solid state AOM Q-switched laser at 266 nm/ marking, carving
video corpo

CNI/AO-W-266/All solid state AOM Q-switched laser at 266 nm/ marking, carving

CNI/AO-W-266/All solid state AOM Q-switched laser at 266 nm/ marking, carving

Product catalog summary
Overview: The document provides technical specifications for the AO-W-266 LD Pumped All-Solid-State UV AOM Q-Switched Laser. This laser operates at a wavelength of 266 nm and is characterized by high peak power, high repetition rate, and short pulse duration, making it suitable for applications such as marking, carving, measurement, and research.
Specifications:
  • Wavelength: 266±1 nm
  • Operating Mode: Q-switched using Acousto-Optic Modulation (AOM)
  • Single Pulse Energy: 1~20 µJ
  • Pulse Duration: 10~15 ns
  • Peak Power: 1~2 kW
  • Repetition Rate: 1~50 kHz, adjustable
  • Average Power: 1-200 mW at 10 kHz, typical
  • Power Stability: Less than 10% over 4 hours
  • Warm-up Time: Less than 10 minutes
  • Beam Divergence: Full angle less than 3.5 mrad
  • Beam Diameter at Aperture: Approximately 4.0 mm
  • Beam Height from Base Plate: 93.5 mm
  • Cooled Method: Air cooled
  • Operating Temperature: 15~35°C
  • Power Supply: PSU-AOM
  • Expected Lifetime: 10,000 hours
  • Warranty Period: 1 year
Physical Dimensions:
  • Laser Unit: 348 mm (L) × 140 mm (W) × 125 mm (H), 6.0 kg
  • Power Supply Unit: 334 mm (L) × 300 mm (W) × 123 mm (H), 6.88 kg
See more

Catalog excerpts

CNI/AO-W-266/All solid state AOM Q-switched laser at  266 nm/ marking, carving-1

LD PUMPED ALL-SOLID-STATE UV AOM Q-SWITCHEDLASER Operating mode Q-switched: AOM (Acousto-Optic Modulation) Single pulse energy(uJ) All solid state AOM Q-switched laser at 266 nm has the features of high peak power, high repetition rate, and short pulse duration, which is widely used in marking, carving, measure, research and so on. 1~50, adjustable Average power (W) = Single pulse energy (mJ) * Rep. rate (kHz) Ave power stability (over 4 hours) Warm-up time (minutes) Beam divergence, full angle (mrad) Beam diameter at the aperture (mm) Beam height from base plate (mm) Cooled method Expected lifetime (hours) Warranty period Website: http://www.cnilaser.com E-mail: [email protected]

 Open the catalog to page 1

All Changchun New Industries Optoelectronics Tech.Co., catalogs and technical brochures

  1. FC-NL series

    1  Page

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.