1. Catalogs
  2. Changchun New Industries Optoelectronics Tech.Co.,
  3. AO-W-1064 LD pumped all-solid-state AOM Q-switched laser from CNI
video corpo

AO-W-1064 LD pumped all-solid-state AOM Q-switched laser from CNI

AO-W-1064 LD pumped all-solid-state AOM Q-switched laser from CNI

Product catalog summary
Overview: The document provides technical specifications for the AO-W-1064, an all-solid-state AOM Q-switched laser operating at 1064 nm. This laser is characterized by high peak power, high repetition rate, and short pulse duration, making it suitable for applications such as marking, carving, measurement, and research.
Specifications:
  • Wavelength: 1064±1 nm
  • Operating Mode: Continuous Wave (CW) and Q-switched using Acousto-Optic Modulation (AOM)
  • Output Power: 1~6W in CW mode; >65% at 10kHz and typically >80% at 20kHz in Q-switched mode
  • Single Pulse Energy: 10~800 µJ
  • Pulse Duration: Approximately 10 ns
  • Peak Power: 10~40 kW
  • Repetition Rate: Options of 1~50 kHz, 1~100 kHz, or 1~200 kHz
  • Average Power Stability: Less than 3%, 5%, or 10% over 4 hours
  • Warm-up Time: Less than 10 minutes
  • Beam Divergence: Full angle less than 2.0 mrad
  • Beam Diameter at Aperture: Approximately 4.0 mm
  • Beam Height from Base Plate: 93.5 mm
  • Cooling Method: Air cooled
  • Operating Temperature: 15~35°C
  • Power Supply: PSU-AOM, 220/110VAC
  • Expected Lifetime: 10,000 hours
  • Warranty Period: 1 year
  • Pilot Light (Optional): Less than 5mW at 650 nm
Dimensions:
  • AO-W-1064: 333(L)×140(W)×125(H) mm, 6.0 kg
  • PSU-AOM: 334(L)×300(W)×123(H) mm, 6.88 kg
See more

Catalog excerpts

AO-W-1064 LD pumped all-solid-state AOM Q-switched laser from CNI-1

LD PUMPED ALL-SOLID-STATE AOM Q-SWITCHED LASER Operating mode Output power All solid state AOM Q-switched laser at 1064 nm has the features of high peak power, high repetition rate, and short pulse duration, which is widely used in marking, carving, measure, research and so on. 1064±1 Q-switched: AOM (Acousto-Optic Modulation) @CW mode @Q-switched mode Single pulse energy (µJ) Ave power stability (over 4 hours) Warm-up time (minutes) Beam divergence, full angle (mrad) Beam diameter at the aperture (mm) Beam height from base plate (mm) Cooled method Expected lifetime (hours) Warranty period Pilot light (optional) Website: http://www.cnilaser.com E-mail: [email protected]

 Open the catalog to page 1

All Changchun New Industries Optoelectronics Tech.Co., catalogs and technical brochures

  1. FC-NL series

    1  Page

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.