MPL-W-532/100~180uJ/1000~3000mW SPECIFICATIONS Wavelength (nm) 532±1 Operating mode LD PUMPED ALL-SOLID-STATE Q-SWITCHEDLASER All solid state Q-switched laser at 532nm has the features of high peak power, high repetition rate, and short pulse duration, which is widely used in industry, such as marking on highly reflective metals, semiconductors, carbide, rubbers, ceramics and composites. Q-switched pulsed laser Single pulse energy (µJ) 100~180uJ Pulse duration (ns) ~5 Peak power (kW) 20~35 Rep. rate (kHz) Uncontrollable Average power (mW) Undefined rep. rate among 15k-20kHz and unstable laser pulse emitting. Suitable for the applications only needing high peak power pulses. Average power (mW) = Single pulse energy (µJ) * Rep. rate (kHz) Ave power stability (over 4 hours) <3%, <5% Transverse mode Near TEM00 Warm-up time (minutes) <10 M2 factor <2. 0 Beam divergence, full angle (mrad) <2. 0 Beam diameter at the aperture (mm) ~4. 0 Beam height from base plate (mm) 93.5 Operating temperature (℃) 10~35 Power supply (90-264VAC) PSU-W-FDA Expected lifetime (hours) 10000 Warranty period 1 year MxL-W-532 PSU-W-LED PSU-W-FDA 333(L)×140(W) ×125(H) mm3, 6.1 kg 300 (L) ×162(W) ×134(H) mm3, 5.2 kg 307 (L) ×168(W) ×123(H) mm3, 5.1 kg Website: http://www.cnilaser.com E-mail: [email protected] Tel: +86-431-85603799 Fax: +86-431-87020258