AO-Z-1064 /1~400uJ/8~13W SPECIFICATIONS Wavelength (nm) LD PUMPED ALL-SOLID-STATE AOM Q-SWITCHED LASER 1064±1 CW Operating mode Q-switched: AOM (Acousto-Optic Modulation) @CW mode Output power @Q-switched mode All solid state AOM Q-switched laser at 1064 nm has the features of high peak power, high repetition rate, and short pulse duration, which is widely used in marking on harder metals such as Titanium, Inconel, or Tool Steel. Single pulse energy (µJ) 1~13W >95%@30kHz, typical 1~400 Pulse duration (ns) <40@30kHz Peak power (kW) ~10 Rep. rate (kHz) 1~200, adjustable by external control Ave power stability (over 4 hours) <1%, <3%, <5%, <10% Warm-up time (minutes) ~4. 0 Beam height from base plate (mm) 96 Polarization ratio >100:1 Cooled method Air cooled Operating temperature (℃) 15~35 Power supply (220/110VAC) PSU-AOM Expected lifetime (hours) 10000 Warranty period 1 year Pilot light AO-Z-1064 <120@200kHz <1.5 Beam diameter at the aperture (mm) <70@100kHz <10 Beam divergence, full angle (mrad) <50@50kHz 5mW @650nm Dimensions PSU-AOM Dimensions 485(L) ×375.5(W) ×132 (H) mm3, 8.0kg 440(L)×114(W) ×130(H) mm3, 6.1 kg Website: http://www.cnilaser.com E-mail: [email protected] Tel: +86-431-85603799 Fax: +86-431-87020258