TDS Spray Putty
3Pages

Chamaleon GmbH Rudolf-Diesel-StraBe, Sa 69115 Heidelberg-Germany Tel.: +49-(0)-6221 520440 Fax: +49-(0)-6221 520449 E-mail: info@chamaeleon/produktion.de http://www.chamaeleon/produktion.de TECHNICAL DATA SHEET CHAMALEON SPRAYING FILLER Filler/ Surfacer Article number: General characteristics: For the filling of coarse scratches from sanding, pores and other unevennesses in one go. Compared to other conventional fillers it allows to continue with repair work quickly. Includes hardener. For use on blank steel, polyester putty, old paint coats (except thermoplastic acrylates) and GRP. For preparation and finishing your filling job, we recommend sand papers for dry and wet sanding. Chamaeleon Spray Putty is a 2-component spray putty on basis of polyester. Quality and properties: ■ Quick and easy working ■ Quick drying allows quick working ■ High elasticity ■ Good adherence ■ Easy to sand, even after a longer period ■ Resistant to weak acids and bases, propellants, solvents, water and de-icing salt Technical characteristics: Basis: Colour: Smell: Consistence: Pot life / Working time at 20°C: Drying time (at 20°C, 50% relative air humidity): polyester resin with mineral fillers beige styrol soft, thixotropic abt. 30 minutes can be sanded after approx. 2 - 3 hours (Drying time: 120 min. at 20°C; 30 min. at 60 ° C; 15 min. at 80°C) Chamaleon GmbH - Technical Data Sheet

Chamdleon GmbH Rudolf-Diesel-StraBe, 8a 69115 Heidelberg-Germany Tel.: +49-(0)-6221 520440 Fax: +49-(0)-6221 520449 E-mail: info@chamaeleon/produktion.de http: //www. chamaeleon/produktion.de Flash point: Density at 20°C: Addition of hardener: Temperature resistance of the cured material: approx. 33°C (resin); not applicable for hardener putty 1.5 g/cm3 hardener 1.0 g/cm3 2 % ^ 120°C Application: Before use, carefully read and observe the warning texts on the label! ■ The ground has to be clean, dry and free from fat. ■ Mix the filler with the hardener well in the mentioned ratio. ■ Work...

Chamdleon GmbH Rudolf-Diesel-Strafte, 8a 69115 Heidelberg-Germany Tel.: +49-(0)-6221 520440 Fax: +49-(0)-6221 520449 E-mail: info@chamaeleon/produktion.de http: //www. chamaeleon/produktion.de For the additional information that is not included to the Technical Data Sheet apply to the supplier: e-mail: info@chamaeleon-produktion.de See information on safety in Safety Data Sheet. Chamaleon GmbH - Technical Data Sheet