Hubbell Industrial EL Series Catalog
16Pages

Industrial Lighting Hubbell Industrial Lighting | EL Series

CONTENTS ABOUT ELECTRONIC HID ACRYLIC HIGHBAY ELECTRONIC HID Electronic HID is a new kind of HID ballast – with microprocessor-based technology that delivers a genuine, quantum leap in metal halide performance. Performance measured by extraordinary, unprecedented lumen maintenance capabilities means huge opportunities for operating cost reductions, both through energy savings and lower maintenance requirements. In addition, Electronic HID also helps turn color shift, lamp blackening and lack of control into long-gone problems of the past. Electronic HID changes the rules by delivering a...

ELECTRONIC HID IMPROVED LUMEN MAINTENANCE = LESS LAMP MAINTENANCE Most lighting systems are designed on the basis of mean or“average” light output of the lamp. For metal halide (MH) lamps, this mean light output, as measured in lumens, defined at 40% of the lamp’s rated life. Since most medium wattage MH lamps are rated at 20,000 hours of lamp life, mean lumens are advertised at 8,000 hours of lamp life. As lumens fall off after the 8,000 hr. design point, the lighting level for many applications may become unacceptable, resulting in the need for re-lamping significantly prior to reaching...

ELECTRONIC HID Electronic HID Features Microprocessor technology Lower operating and maintenance costs High frequency operation Fewer fixtures True constant wattage Energy savings Fewer SKU’s Less chance for error MORE ABOUT...STANDBY LIGHTING VERSATILITY Electronic HID’s 120-volt output is designed to operate one quartz (incandescent) standby lamp up to 250W. The quartz lamp on or off modes are determined by the HID lamp’s specific operating conditions. Once the HID lamp strikes, the quartz lamp automatically switches off when the HID lamp reaches 50% power. Ease of change over to...

Introducing EL Series Electronic Ballast The new Hubbell Industrial Lighting EL Series Electronic Ballast delivers a new • Lower operating and maintenance costs. • Better lumen maintenance - light output depreciation cut 30%-50%. • Fewer fixtures needed to light the same space over standard MH. • Energy savings of more than 40% per year. • Variable dimming to 50% of lamp power. More Lumens • Electronic HID raises the performance of pulse start lamps to a new level. • Electronic HID systems deliver 35% more light at mean lumen output than traditional probe-start systems and nearly 50% more...

Mogul Base The EL Series Bl is ideal for light manufacturing areas, warehouse and retail aisles. Steel ballast housings should be used in areas with minimal airborne The EL Series Bl features an Anodal® finished 14" diameter spun alumi- num reflector for improved optical performance. Field adjustable brackets provide narrow, medium and wide lighting distributions for application Steel housing with white polyester powder coat finish. All electrical compo- nents are positioned to assure unit will hang straight. Housing is ventilated for optimal thermal performance. Electronic ballast is 100%...

The EL Series EG is ideal for light manufacturing areas, warehouse and retail aisles. Steel ballast housings should be used in areas with minimal airborne The EL-EG 19" diameter reflector system excludes dirt and dust, maintaining desired performance. It is white polyester powder coated and has a clear glass bottom lens. Note: shown with optional CFB (charcoal filter breather) on Steel housing with white polyester powder coat finish. All electrical compo- nents are positioned to assure unit will hang straight. Housing is ventilated for optimal thermal performance. Electronic ballast is 100%...

Mogul Base The EL Series SU/SD/AL is ideal for light manufacturing areas, warehouse and retail aisles. Steel ballast housings should be used in areas with minimal airborne contaminants. The SU optic is ideally suited for new construction or retrofit lighting. The uplight component softens the overall brightness difference between the lumi- naire and surrounding area. The SD optic is an Anodal® finished 19" spun alumi- num reflector engineered for applications requiring downlight only. The AL optic economically lights the vertical surfaces of warehouses and storage area stacks. Steel housing...

The EL Series LM is ideal for light manufacturing areas, warehouse and retail aisles. Steel ballast housings should be used in areas with minimal airborne contaminants. The EL-LM Series is designed for many years of demanding, heavy-duty industrial service. Ideally suited for low to medium mounting heights in areas requiring good horizontal uniformity and high vertical illumination. LM's low brightness refractor produces wide distribution without harsh shadows while projecting light into machinery for optimum yet comfortable visibility. 29" spun aluminum with white Lektrocote® finish....

Mogul Base The EL Series LB1 is ideal for light manufacturing areas, warehouse and retail aisles. Steel ballast housings should be used in areas with minimal airborne contaminants. Reflector is spun, high purity, heavy-gauge aluminum with white Lektrocote® paint finish inside and out. Hinged and latched with corrosion-resistant steel hardware. Computer-designed acrylic refractor (polycarbonate available) is UV stabilized for long life and durability. Refractor provides square distribution to enhance uniformity and increase fixture spacing. Steel housing with white polyester powder coat...

The EL Series HGX16/HGX-22 is ideal for light manufacturing areas, warehouse and retail aisles. Steel ballast housings should be used in areas with minimal airborne contaminants. The HGE-16/HGE-22 and HGO-16/HGE-22 Series glass reflectors are manufactured from shock and impact resistant borosilicate glass, providing good uplight and three dimensional lighting. These high quality glass optics come with a specially designed ballast housing engineered for maximum performance. The reflector is mounted to the ballast housing by a combination of die cast aluminum socket housing and rigid,...