Catalog excerpts
Industrial Lighting Energy Efficient LED Technology ONLY 6.5 TOTAL WATTS PER UNIT! AW LED Retrofit sale area warning light RETRO-FIT - AWRETRO120 FEATURES/APPLICATIONS The AW series LED obstruction light is the most universal, compact and efficient obstruction light available in the market. Certified to FAA AC NO: 150/5345-43F requirements. SPECIFICATIONS • Uses 95% less energy than incandescent, only 6.5 total watts per unit • Available in 120 VAC • 50,000 hrs life • Weather/corrosion resistant lamp assembly and housing • Resistant to shock and vibration • IP66 / NEMA 4X GLASS LENS WITH CAST ALUMINUM BASE SAFETY CHAIN SECURING SCREW ORDERING INFORMATION Contact your agent SOCKET EXTENSION for special pricing LAMP AND SOCKET AW-RETRO-120 Retro-fit AW LED area warning light VOLTAGE SUPPLY WIRES CAST ALUMINUM HOUSING EASILY RETROFIT INCANDESCENT BYMB OBSTRUCTION LUMINAIRES Follow the steps below to retrofit incandescent fixtures to the energy-efficient AWRETRO120: INCANDESCENT GLASS LENS WITH CAST ALUMINUM BASE SAFETY CHAIN SECURING SCREW LAMP AND SOCKET SOCKET EXTENSION VOLTAGE SUPPLY WIRES CAST ALUMINUM HOUSING SAFETY CHAIN “ANCHOR” CONNECTION 1. Detach the safety chain from the aluminum base that holds the glass lens 2. Loosen the securing screw 3. Remove the glass lens and aluminum base 4. Disconnect or cut the voltage supply wires near the socket 5. Remove the lamp, socket and socket extension 6. Attach the safety chain to the aluminum base of the retrofit assembly, use new hardware supplied 7. Inspect the existing wiring, remove unnecessary wire splices or excess wire if any 8. Connect the Retrofit assembly wires to the voltage supply wires: Black to Black, White to White and Green to ground 9. Place Retrofit assembly over the cast aluminum housing, securely tighten the securing screw (repeat above steps for double marker units) SAFETY CHAIN “ANCHOR” CONNECTION LED – AWRETRO120 LED RETROFIT ASSEMBLY ALUMINUM BASE SECURING SCREW LED INPUT WIRES VOLTAGE SUPPLY WIRES CAST ALUMINUM HOUSING Note: Double obstruction light with transfer relay will not operate properly with the AWRETRO120 LED assemblies, disconnect power before installation or service, all service must be performed by qualified personnel Hubbell Industrial • 701 Millennium Boulevard • Greenville, SC • 29687 • 864-678-1000 LED RETROFIT ASSEMBLY
Open the catalog to page 1All Chalmit catalogs and technical brochures
-
Superbay Series
16 Pages
-
Superwatt Gymnasium Lighting
2 Pages
-
LED - Solid State Lighting
4 Pages
-
Kemlux II Brochure
9 Pages
-
Kemlux III Brochure
22 Pages
-
LED Highbay
3 Pages
-
Kemlux III LED
2 Pages
-
LUNABAY LED Brochure
2 Pages
-
LED Vaportite
2 Pages
-
NutriLED Brochure
9 Pages
-
AW LED Specification Page
1 Pages
-
12XPB Specification Sheet
3 Pages
-
Dokstar Specification Sheet
2 Pages