12XPB Specification Sheet
3Pages

75 watt, 12VDC output, Hazardous Location Emergency System Catalog Number Comments The 12XPB Series is a self-contained hazardous location emergency lighting system which is designed for environments known to have high concentrations of gas, explosive vapors and dust. The 12XPB is intended for use in oil and gas refining, chemical production and storage, grain processing and paint manufacture. The 12XPB provides emergency illumination for a minimum of 90 minutes in the event of power outage. Power is only supplied to the external lamps when AC power is lost. The 12XPB can be applied in the following enviroments: Class I, Div. 1 & 2, Groups C, D Class I, Zones 1 & 2, Groups IIB, IIA Class II, Div. 1 & 2, Groups E, F, G Class III, Div. 1 & 2 12XPB enclosure with integral charger and battery pack The XPB Series housing is made of copper-free(less than 0.4%) aluminum with a baked on electro-statically applied epoxy for maximum corrosion resistance. The housing contains lead acid batteries which deliver 75 watts to power external 12VDC, 18 or 28 watt incandescent lamps for 90 minutes in the event of power outage. The enclosure, lamp-heads and test station utilize ¾” connection. There are 7 each -3/4” threaded holes in the enclosure. Provided with 2 mounting holes at each corner for attachment to a wall or other suitable surface. The housing contains 7 each ¾” drilled and tapped holes for threaded conduit. Quick access to internal wiring and circuitry through a threaded cover with supplied gasket. The 12XPB assembly includes a remote test station(push-to-test and AC indicator) along with seal fitting, ¾” pipe nipple and sealing compound. The lighting fixtures(ordered separately) can be pendant, wall or ceiling mount. Voltage input through a heavy duty transformer at 120 or 277VAC operation. Fully automatic solid-state charger which includes low voltage disconnect to prevent deep discharge of the battery. Includes six maintenance-free lead acid batteries to provide 12VDC output to power up to 75 watts of load for 90 minutes. An AC-on indicator and push-to-test station(sold separately) provides momentary testing of the system. ORDERING GUIDE Capacity 75K 75 watts for 90 minutes Time Delay Relay Blank No TDR TDR120 120VAC input TDR277 277VAC input To order the enclosure with charger and batteries only. Operating Temperature Full 3 year warranty UL924 Emergency Listed UL844 Hazardous Location Listed Power Consumption 120VAC- 15 Watts

75 watt, 12VDC output, Hazardous Location Emergency System The following fixtures are designed to be powered from the 12XPB battery pack and are available in wall, ceiling or pendant mount configurations. The fixtures are available in direct or remote connection pendant, or for wall or ceiling configuration. The fixtures are suitable for use in wet locations. The fixtures meet the following listing criteria; Class I, Div. 1 & 2, Groups C, D Class I, Zones 1 & 2, Groups IIB, IIA Class II, Div. 1 & 2, Groups E, F, G Class III, Div. 1 & 2 The EX and REX lighting fixtures are made of...

75 watt, 12VDC output, Hazardous Location Emergency System DIMENSIONS Pendant EX100CD- Exit Sign Accessory REX-AR- Angled Reflector REX-SDR- Standard Reflector XWG- Guard Web: www.dual-lite.com • Tech Support: (866)-313-3909 701 Millennium Blvd. • Greenville, SC 29607 U.S.A. Copyright © Dual-Lite, a division of Hubbell Lighting, Inc., All Rights Reserved Specifications subject to change without notice. • Printed in U.S.A.