*mydirectindustry

SYNCHRONOUS BELTS

Product catalog summary

Overview
This document provides technical specifications for the Challenge Synchronous Drives Range, including timing belts and pulleys. It highlights the synchronization of profitability and performance through an extended range of products.

Product Range

Pulleys: Available in taper bored and pilot bored options.
Belt Range: Includes classical timing drives, HTD timing drives, and metric timing drives.

Classical Timing Drives

XL: Pulleys with 10-72 teeth, belts with 60-250 teeth, widths of 025/037.
L: Pulleys with 18-120 teeth, belts with 10-96 teeth, lengths of 124-600, widths of 050/075/100.
H: Pulleys with 16-120 teeth, belts with 14-156 teeth, lengths of 240-1700, widths of 075/100/150/200/300.
XH: Pulleys with 18-96 teeth, widths of 200/300/400.
XXH: Pulleys with 18-90 teeth, widths of 200/300/400/500.

HTD Timing Drives

3M: Pulleys with 10-72 teeth, widths of 09/15.
5M: Pulleys with 34-105 teeth, belts with 12-72 teeth, lengths of 305-2000, widths of 15.
8M: Pulleys with 22-192 teeth, belts with 22-192 teeth, lengths of 480-2800, widths of 20/30/50/85.
14M: Pulleys with 28-216 teeth, belts with 28-192 teeth, lengths of 966-3850, widths of 40/55/85/115/170.

Metric Timing Drives

T2.5: Pulleys with 12-60 teeth, width of 16.
T5: Pulleys with 12-60 teeth, widths of 21/27/36.
T10: Pulleys with 12-60 teeth, widths of 31/40/47/66.

Additional Information
New products are coming soon, available in pilot bore only. For technical support, contact [email protected].

Catalog excerpts

with a wider choice Extended Range Metric Synchronous Secure source of supply • Superior service Product quality and reliability • Manufacturers prices Securing more than just your profits Never a problem always a ...

Open the catalog to page 1

Challenge Synchronous Drives Range Pulleys Belt Range Taper Bored Pilot Bored Profile No teeth Width No teeth Width Length Width Classical Timing Drives XL L 18 - 120 050/075/100 H 16 - 120 100/150/200/300 XH 18 - 96 200/300/400 XXH Metric Timing Drives T2.5 Pilot T5 Bore Only T10 Coming Soon For Technical Support e-mail [email protected] Challenge is a registered trade mark of CFE Holdings ltd, HTD® is a registered trademark of the Gates Corporation.

Open the catalog to page 2

All Challenge Power Transmission Plc catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list