Magnetic Particle Brake (Hollow-shaft Type) Technical Summary

1. Product Overview

This document provides technical specifications for a series of magnetic particle brakes with hollow-shaft design, identified by model numbers such as ZKX0S3AA, ZKX0S6AA, and ZKX1S2AA. These brakes operate on DC 24V at 75ºC.

2. Key Specifications

• Capacity: Ranges from 0.3 to 1.2 kgm (equivalent to 3 to 12 Nm rated torque).
• Rated Torque: Specified in Newton-meters (Nm), matching the capacity values.
• Moment of Inertia (J): Values range from 3.5 x 10^-5 to 1.6 x 10^-4 kgm², indicating the rotational inertia of the brake rotor.
• Current Consumption: Between 0.4 A and 0.5 A at DC 24V.
• Power Consumption: Approximately 9.6 W to 12 W.
• Time to Establish Torque (S): Between 0.035 and 0.07 seconds, indicating quick response time.
• Maximum Rotational Speed: Up to 400 rpm.

3. Mechanical Dimensions and Features

• Keyway: Dimensions provided for key slots, e.g., 3-M4*P0.7*6L and ød H7.
• Exterior Dimensions: Detailed measurements for parameters such as A, B, C, D, D1, D2, D3, W, and T are listed for each model, ensuring compatibility with mounting requirements.
• Output Cable: Standard length of 300 mm.

4. Model-Specific Data

5. Critical Notes and Recommendations

• The brakes are designed for quick torque establishment, suitable for applications requiring rapid response.
• Maximum rotational speed is limited to 400 rpm to ensure safe operation.
• Mechanical dimensions must be carefully matched to the application to ensure proper fit and function.
• Electrical specifications indicate low power and current consumption, beneficial for energy-efficient designs.