Chamfering, v-grooving, the 45° spot drill can be used for carving and spotting. e Clerance angle negates interference between the insert/cutting tool and the workpiece during

Inner hole chamfering

Cutter Type | 内 孔 倒 角 加 工 ( Inner hole chamfering )

Applicable Industry

Applicable Industry

SD HIHARE Cutting Condition: ISO Saaz Refractory Alloys @ 3281)4) Continuous Cutting © 一 般 切削 General Cutting Interrupted Cutting TC.10 ~ TC.13.0.2mm chamfering radius. TC.16 04mm channfering radius. FR 刀 月 為 鋭角 刀 月 Suffix FR model designates a sharp

KOSS Low-Alloy Steels aea Alloy Steels ves Stainless Steels Machining Materials iKSe38 Low-Alloy Steels 228 Alloy Steels Kwa Stainless Steels ASML Carving/Engraving Machining Materials SSP Chamfering Tool Cutting Data

Processing Type Machining Materials 低 合金 鋼 Low-Alloy Steels 合金 Alloy Steels Aiea Stainless Steels Cast lron Processing Type Machining Materials 低 合金 鋼 Low-Alloy Steels Sea Alloy Steels 不 鏡 鋼 Stainless Steels

Multi-edge for high feeding rate. Free of burrs when chamfering. Available for up and down

Alloyed Steels Cast Iron seen | Hard Material Layer co microprogram

M405 Chamfering Tool Cutting Data JAMS Grade Stainless Steels Low-Alloy Steels 主軸 韓 球 =(1000x 切削 球 度 ) ょ (3.14x 刀 具 外 径 ) Spindle Speed=(1000x Cutting speed) ょ (3.14x Cutter diameter). Feeding Speed(mm/min)= Feed per teethx Teethx Spindle speed.

@ SHAPHAKEDRBR32K No. 232, Wuquan Rd., Qingshui Dist., Taichung City 436, Taiwan @} www.chain-headway.com @ Other Sales Region Please