SN series
4Pages

Hall effect T-bar fader The SN Series is a precision fader control designed and built to meet the demands of the broadcast industry. Contactless hall effect technology, using the latest generation sensor, results in reliable noise-free operation. A smooth consistent feel is achieved by utilising steel ball races and PTFE bearing surfaces. The SN Series is available with analog linear voltage or PWM outputs, having a range of factory configured gain settings. The mechanical design is complemented by two aluminium handle options in 'Barrel' □ CONSISTENT SMOOTH FEEL □ 'BARREL'OR'BULLET'ALUMINIUM HANDLES □ PRECISION BALL RACE BEARINGS & PTFE GUIDES □ ANALOG VOLTAGE OR PWM OUTPUT OPTIONS □ LATEST GENERATION HALL EFFECT SENSOR □ ABSOLUTE POSITIONING □ 12 BIT RESOLUTION □ INDUSTRY STANDARD MOUNTING

Hall effect T-bar fader Barrel Handle Bullet Handle Barrel Handle Bullet Handle OUTPUT VOLTAGE POLARITY Standard Reversed High Voltage High Voltage f*\ Low Voltage Solder Lugs Solder Lugs Operating Force Mechanical Angle of Movement Expected Life Lever Action (Centring) Friction clutch Operating Temperature Storage Temperature Screening Plates Not sealed. For internal applications only Mineral filled nylon Acetyl - Black Aluminium - Silver anodised Mild Steel - Zinc plated ELECTRICAL SENSOR Power Supply Output Voltage Output Impedance Hall effect - All specifications shown are based on a...

Hall effect T-bar fader DIMENSIONAL DRAWING Front View Side View Magnetic Screening Solder Lugs High Voltage Dimensions in millimetres (Inches in brackets) MOUNTING INSTALLATION Installation Dimensions Note: Handle halves un-screw to allow lever to pass through the slot in panel. Dimensions in millimetres (Inches in brackets) Note: The company reserves the right to change specifications without notice.

Hall effect T-bar fader CONFIGURATION OPTIONS_ GAIN OPTIONS The SN series utilises high quality ball bearings at the pivot point of its lever and uses a PTFE friction clutch assembly to create the smooth, damped, put and stay feel of the lever to ensure a consistent feel over the life of the product. POWER SUPPLY The SN series is designed to be powered by a regulated 5V+/-0.5V power supply. The output is ratiometric, making □ stable, noise free, power supply essential. The power supply to the SN series should be carefully regulated to be within tolerance. Should the power supply change...