MS Series III
14Pages

{{requestButtons}}

Catalog excerpts

MS Series III - 1

CH MS sries Mid-size Hall effect joysticks Products an APEM Group Company The MS Sries joystick is a contactless, Hall effect controller developed for demanding operator control applications requiring a rugged, yet compact hand-operated positioning device. Available with several ergonomic multi-axes handles while utilizing only five square inches of surface area, the MS Series joystick is ideally suited for off-highway enclosed cabin vehicles. Striking the perfect balance between size and durability, widely used applications include watercraft, agricultural, forestry, and material handling vehicles. KEY FEATURES □ Compact size □1, 2 and 3 axes configurations □ Available with J1939 CANbus □ Available with USB □ Redundant outputs available □10 million life cycles □ Sealed up to IP68 www.chproducts.com

Open the catalog to page 1
MS Series III - 2

MS sries Mid-size Hall effect joysticks OPTION SELECTION MS SERIES FRONT BUTTONS SIDE BUTTONS 0 None U One Upper Position L One Lower Position F Two P Proximity Sensor D Deadman SPRING TENSION3 00 Standard 01 Light 02 Heavy OUTPUT OPTIONS ADDITIONAL OPTIONS V Voltage Regulator D Dual Decode DC Center Detect AD Analog Deadband P Proximity Sensor E Environmental Sealing* N None O One W Two 0 0V to 5V (Rail to Rail) 1 0.5V to 4.5V 2 0.25V to 4.75V 3 1V to 4V 4 0V to 5V - Sensor 1 0V to 5V - Sensor 2 5 0.5V to 4.5V - Sensor 1 0.5V to 4.5V - Sensor 2 6 0.25V to 4.75V - Sensor 1 0.25V to 4.75V -...

Open the catalog to page 2
MS Series III - 3

MS sries Mid-size Hall effect joysticks STANDARD CONFIGURATIONS STOCK GRIP HANDLE1 SHORT STOCK GRIP HANDLE2 1, 2 1 2 1 2 1, 2 1 2 Side Buttons and Deadman; as shown, are away from you. 9 10 1 2 Top and Side buttons Deadman Proximity Sensor (Switch 10 is inside the handle Top buttons LOW PROFILE SQUARE FRONT3 2 DEFAULT WIRE COLOR CODE* AVAILABLE BUTTON COLORS o White o Gray Black o Red4 o Orange o Yellow o Green o Blue O Purple COLOR FUNCTION AWG RED Vcc or Vdd BLACK Ground BLUE X Axis 28 YELLOW Y Axis GREEN Z Axis WHITE Switch Common (optional) ORANGE Switch 1 (optional) VIOLET Switch 2...

Open the catalog to page 3
MS Series III - 4

MS sries Mid-size Hall effect joysticks SPECIFICATIONS mechanical (for x and y axes) Break Out Force - 5.6N (1.25lbf) Operating Force - 7.5N (l.70lbf) Maximum Applied Force - 650N (145lbf) Mechanical Angle of Movement - 40° Expected Life - 10 million cycles Material - Glass reinforced nylon Lever Action (Centering) - Spring centering mechanical (for z axis) Break Out Force - 0.15Nm (1.33lbfin) Operating Force - 0.25Nm (2.21lbfin) Maximum Allowable Force - 4.50Nm (39.83lbfin) Hand Mechanical Angle - 68° Handle Action - Spring return Expected Life - 1 million cycles environmental Operating...

Open the catalog to page 4
MS Series III - 6

MS sries Mid-size Hall effect joysticks DIMENSIONAL DRAWINGS - continued 51.10 (2.01) 63.80 56.90 (2.24) Brass ultraserts 6-32 x 0.25 Screw 6-32 x 7/8 PH PAN s/s 4 places 51.10 (2.01) (2.13) NOTES 1. Dimensions are in mm/(inch) 2. Standard configurations feature a rubber grommet as indicated in the above drawings. An optional plastic strain relief is available and will increase under panel mounting depth by 19.05 (0.75). 3. Actual strain relief position may vary 4. Axes orientation: MOUNTING CUTOUT DIMENSIONS 03.90 x 4 places (0.152) (0.25) x 4 places Note: The company reserves the right to...

Open the catalog to page 6
MS Series III - 10

MS sries Mid-size Hall effect joysticks CONFIGURATION OPTIONS - continued_ ADDITIONAL OUTPUT OPTIONS PLUG-AND-PLAY SOLUTIONS: JOYBALL (CURSOR EMULATION) The Joyball option converts multi-axis joystick output into a mouse, trackball, or cursor control device. The joystick's internal microprocessor converts absolute axis position into a curser velocity, which is translated as a relative trackball or mouse position. Supported protocols include Sun Microsystems (mouse systems 5vdc serial) and USB. APPLICATIONS The Joyball option is ideal for vehicle applications subjected to dirt and high...

Open the catalog to page 10
MS Series III - 11

A-15-Serie 4400-4600-A table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:5.60pt "Arial", sans-serif; } .font2 { font:11.20pt "Arial", sans-serif; } .font3 { font:6.00pt "Arial Black", sans-serif; } .font4 { font:8.00pt "Arial Black", sans-serif; } .font5 { font:26.00pt "Arial Black", sans-serif; } .font6 { font:2.00pt "Franklin Gothic Medium", sans-serif; } .font7 { font:4.00pt "Franklin Gothic Medium", sans-serif; } .font8 { font:6.00pt "Franklin Gothic Medium", sans-serif; } .font9 { font:7.00pt "Franklin Gothic...

Open the catalog to page 11
MS Series III - 12

MS sries Mid-size Hall effect joysticks CONFIGURATION OPTIONS - continued ADDITIONAL OUTPUT OPTIONS ELECTRICAL SPECIFICATIONS Supply Power Supply Current 4.5VDC to 5.5VDC 10mA per axis WIRING SPECIFICATION Red wire Black wire Blue wire Yellow wire Green wire White wire Customer power supply 4.5-5.5vdc Ground X axis output Y axis output Z axis output Pushbutton common wire Orange,violet,gray,brown,pink,bl/wt/y/bk,gn/bk,gy/w wire - Pushbutton outputs CENTER DETECT Center Detect utilizes a microprocessor to monitor joystick output and provides both logic and proportional signals for enhanced...

Open the catalog to page 12
MS Series III - 13

MS sries Mid-size Hall effect joysticks CONFIGURATION OPTIONS - continued ADDITIONAL OUTPUT OPTIONS DISCRETE OUTPUT Discrte Output is a microprocessor based option that provides up to six hi voltage/hi current, on/off outputs as well as proportional signals. Featuring a microcontroller, an a/d converter, and four to eight optically isolated solid state switches, the Discrete Output provides an electronic "switch stick" function. Switch combinations and firing angles are programmed to the application's requirement. APPLICATIONS The Discrete Output option is designed for small motor,...

Open the catalog to page 13
MS Series III - 14

MS sries Mid-size Hall effect joysticks CONFIGURATION OPTIONS - continued ADDITIONAL OUTPUT OPTIONS VOLTAGE REGULATOR The Voltage Regulator is a multi-wired analog option used to mate to a variety of industrial control voltages. The Voltage Regulator may be used when the supply or output voltage is greater than 5V or when bipolar output is required. User Specified Supply Voltage: 5 VDC 镕 10 VDC 12 VDC Օ 24 - 30 VDC Custom supply options available. User Specified Output Voltage: Օ 0-5 VDC 0-10 VDC Օ +/-5 VDC +/-10 VDC Օ Custom outputs available. ELECTRICAL SPECIFICATIONS Supply...

Open the catalog to page 14

All Ch products catalogs and technical brochures

  1. 9000 series

    7 Pages

  2. 1000 series

    6 Pages

  3. NZ series

    5 Pages

  4. SN series

    4 Pages

  5. HF series

    10 Pages

  6. 4000 series

    7 Pages

  7. HG Data Sheet

    15 Pages

  8. IPD Ultima

    3 Pages