4000 series
7Pages

Industrial resistive joysticks an APEM Group Company The 4000 Series is a range of robust, industrial quality potentiometer joysticks for internal applications. All 4000 Series share the same, all metal mechanism to provide the finest and service life over a wide range of temperatures and loads. All 4000 Series employ high tic film potentiometers, yielding a service life of many millions of cycles. quality plas- □ Two standard mounting options □ Variety of potentiometer options □ Optional centre-detect micro- J Available in two body variants

4000 series Industrial resistive joysticks OPTION SELECTION Friction Hold¹ Third Axis * for more handles see next pages Note: 1 Only available on 4P types CABLE SPECIFICATIONS 14/0.12 - Fourteen strands of 0.12mm diameter tinned annealed copper wire PVC insulated, to a nominal OD of 1mm Red Blue Green 7/0.127 Black Yellow : +Vcc for X & Y Axes : X Axis Wiper : Center Tap : 0V for X & Y Axes : Y Axis Wiper - Seven strands of 0.127mm diameter tinned copper wire ETFE insulated, to a nominal OD of 0.7mm Orange : Pushbutton Red : +Vcc for Z Axis Blue : 0V for Z Axis Green : Z Axis Wiper All 4000...

4000 series Industrial resistive joysticks DIMENSIONAL DRAWINGS - HANDLES 14.00 (0.55) MATERIAL FINISH STANDARD COLOR OTHER COLORS NOTES: Phenolic Gloss Black Not Available Aluminium Anodised Black Not Available Nylon Sparked Matt Black Upon Request Stainless Steel Natural Stainless Steel Not Available MATERIAL FINISH STANDARD COLOR OTHER COLORS NOTES: ABS Sparked Matt Black Upon Request Uses APEM IS Switch ABS Sparked Matt Black Not Available Uses APEM IS Switch Nylon Sparked Matt Black Not Available Aluminium Anodised Black Not Available Third Axis function MATERIAL FINISH STANDARD COLOR...

4000 series Industrial resistive joysticks DIMENSIONAL DRAWINGS - HANDLES - continued MATERIAL FINISH STANDARD COLOR OTHER COLORS NOTES: Aluminium Anodised Black Upon Request Uses APEM IA switch Delrin Gloss Black Not Available Uses APEM IS switch Aluminium Anodised Black Not Available Aluminium Anodised Black Not Available Uses Apem IA Switch MATERIAL FINISH STANDARD COLOR OTHER COLORS NOTES: Nylon Sparked Matt Black Upon Request Stainless Steel Polished Stainless Steel Not Available Note: The company reserves the right to change specifications without notice. Santoprene over Nylon Soft...

4000 series Industrial resistive joysticks DIMENSIONAL DRAWINGS - continued CLOSED BODY OPEN BODY NOTE: The dimensions shown are for a generic two axes 4000 Series open body with the E type handle, and a generic two axes 4000 Series closed body also with the two axes E type handle. For specific dimensions of this or any other configuration please refer to Apem. MICROSWITCHES Note: The company reserves the right to change specifications without notice.

4000 series Industrial resistive joysticks MOUNTING INSTALLATION OPEN FRAM E - PANEL CUT-OUT AND M OUNTING INSTALLATION The joystick mounts from beneath the panel and the boot is trapped between the joystick and the panel. No bezel is necessary for this installation, since the panel acts as the bezel. The frame has M2.5 tapped holes and as such M2.5 machine screws are recommended for this mounting. CLOSED FRAME - PANEL CUT-OUT AND MOUNTING INSTALLATION The body of the joystick is mounted from beneath the panel. The boot is passed through the panel cut-out and is held onto the front face of...

4000 series Industrial resistive joysticks CONFIGURATION OPTIONS MECHANISM Unlike most other products in it's class the 4000 Series employs an all-metal mechanism, providing the finest feel. It delivers consistent return to center performance over life, across a broad range of applications and operating environments. The 4000 Series is offered in two body styles; the more standard closed body type should be selected for those applications requiring standard single or dual axes functionality. The open frame variant may be specified for those applications requiring friction hold...