Emotron TSA Softstarter
8Pages

Starts, stops and protects Emotron TSA – Softstarter

First in a new line of CG high performance softstarters Emotron TSA softstarters take motor control to a new level. Soft torque starting, intelligent load monitoring and smart stops are all included and accompanied by a robust and compact design. By developing the Emotron TSA range of electronic softstarters CG has taken a major step towards the ideal motor controller for applications where variable speed is not required. You simply get everything except variable speed! Robust and efficient Integrated by-pass with proven contactor technology To enable lowest possible energy consumption...

application requirements. This torque control ensures an ultra-smooth start with constant acceleration. The torque control means the starting current is reduced even further by up to 30%. You can use smaller fuses and less expensive cables, and will thus benefit from lower installation and energy costs. The smooth starts also lead to less mechanical stress, improved process control and reduced maintenance costs. Y/D start Voltage/current control softstarter Emotron TSA torque control softstarter Controlled starts also with challenging loads Torque boost can be used to overcome initial...

Slow speed and jog operation Apart from ramping up and down the speed between zero and rated motor speed, Emotron TSA softstarter offer low speed operation in both forward and reverse direction without additional hardware. Slow speed or jogging forward or backward can be useful for aligning a load or having the motor running at low speeds for test or service purposes. Examples of applications where such low speed or jog operation is valuable are loading/unloading of centrifuges or mixers or positioning of feeding conveyors. Coated boards When used in harsh environment the lifetime of...

Clever and Easy to use Easy to install and easy to use Installation is quick and cost-efficient, since no additional equipment is required. Everything you normally need is included in an Emotron TSA unit. A number of options let you customize the softstarter functionality. Multi-lingual control panel with single-function keys and copy function Designed for global application the Emotron TSA softstarters carry a multi-lingual display unit as standard. The control panel has a menu system with unique menu numbers and separate menu keys and start/stop keys.

Motor load monitoring with auto-set of alarm levels The Emotron TSA softstarter has a built-in load monitor that protects your machine and process against costly downtime, equipment damage and break-down. It reacts immediately if a crusher is jammed, a pump is running dry, a compressor is idling, or a fan is operating inefficiently due to a blocked filter. This is achieved by constant viewing of the motor shaft power. Any deviation from your selected load levels will result in a warning or a quick but smooth stop. The actual load can be remotely displayed via analogue or fieldbus...

Pumps Fans Compressors Blowers Crushers Screens Mills Mixers Saws One communication module and up to two option boards can be mounted. Communication modules • Profinet 1 or 2 ports - Industrial Ethernet communication • Modbus/TCP – Industrial Ethernet communication • EtherCAT - Industrial Ethernet communication • Profibus DP- Fieldbus communication • DeviceNet - Fieldbus communication • Serial communication via RS485 with Modbus RTU ( RS232 standard) Option boards • Extended digital I/O (3 + 3) • PTC/PT-100 Motor protection (3 + 3 PT100) Other options • External control panel, IP54 suitable...