Soft starts – smart stops Emotron MSF 2.0 Softstarter

Ultra-smooth starts reduce your costs Conventional softstarters use a pre-defined voltage ramp to control the start. With Emotron MSF, the actual motor torque is continuously calculated and controlled according to the application requirements. This so called torque control ensures an ultra-smooth start with constant acceleration. The torque control means the start current is reduced even further by up to 30%. You can use smaller fuses and less expensive cables, and will thus benefit from lower installation and energy costs. The smooth starts also lead to less mechanical stress, improved process...

Easy to install and easy to use Installation is quick and cost-efficient, since no additional equipment is required. Everything you need is included in the Emotron MSF unit. A number of options let you customize the Emotron MSF functionality and fully utilize the softstarter according to your needs. Quick and cost-efficient installation Installing an Emotron MSF unit is quick and cost-efficient. There is no need for any of the additional equipment usually required to complement soft starter functions – DC brakes, motor protection relays, mains failure relays, load monitors, meters, displays or...

A wide range to suit your needs Applications Pumps Fans Compressors Blowers Crushers Screens Technical data Emotron MSF 2.0 softstarters are available in the following range: Mills Supply voltage 200 – 690 V, 3-phase Mixers Rated current 17 – 1,650 A Rated power 7.5 – 1,600 kW Protection class IP20, NEMA 1 (up to 960 A) IP00, NEMA 0 (up to 1,650 A) Approvals CE, UL, GOST R Saws For further technical information, please see the Emotron MSF 2.0 data sheet.