Compact Drive Data Sheet DEDICATED DRIVE

Emotron CDU/CDX 2.0 Variable speed drives for Compact Drives Electrical specifications related to model Table 1 Typical motor power at mains voltage 400 V Normal duty (120 %, 1 min every 10 min) Heavy duty (150 %, 1 min every 10 min) Frame size Typical motor power at mains voltage 460 V Normal duty (120 %, 1 min every 10 min) Heavy duty (150 %, 1 min every 10 min) Frame size Typical motor power at mains voltage 525 V Normal duty (120 %, 1 min every 10 min) Heavy duty (150 %, 1 min every 10 min) Frame size * Available for a limited time and as long as drive temperature permits.

Dimensions and Weights The table below gives an overview of the dimensions and weights. Protection class IP55 is according to the EN 60529 standard. Table 4 As an option, both sizes are available with cable entry from the short side, see example in Fig. 3. Mechanical specifications Frame size * Weight is without motor and adapter plate. Drawings CDU and CDX CDU/CDX 48/52: Model 026 – 046 (C) with cable entry from the short side.* * Note! Cable glands are optional.

General electrical specifications Table 5 General electrical specifications General Mains voltage: CDU and CDX 48 CDU and CDX 52 Mains frequency Input power factor Output voltage Output frequency Output switching frequency Efficiency at nominal load 380-480 V +10%/-15% 440-525 V +10%/-15% 45 to 65 Hz 0.95 0–Mains supply voltage 0–400 Hz 3 kHz (CDU is adjustable 1,5-6 kHz) 97% for models 008 to 018 98% for models 026 to 046 Control signal inputs Analogue (differential) Analogue Voltage/current Max. input voltage Input impedance Resolution Hardware accuracy Non-linearity 0 - ±10 V/0-20 mA via software...

Operation at higher temperatures Most Emotron variable speed drives are designed for operation at maximum of 40°C ambient temperature. However it is possible to use the VSD at higher temperatures with little loss in performance. Table 6 shows ambient temperature as well as derating for higher temperatures. Operation at higher switching frequency Only valid for CDU. Table 7 shows the switching frequency for the different VSD models. With the possibility of running at higher switching frequency you can reduce the noise level from the motor. Table 7 Ambient temperature and derating for 400 – 525V...

Environmental conditions * Brake output only available if the VSD is ordered with cable entry/exit at short end. Note: Cable glands are optional.

Control signals Table 11 Terminal X1 Function (Default) Process reference 0 -10 VDC or 0/4–20 mA analogue input bipolar: -10 - +10 VDC or -20 - +20 mA 0 -10 VDC or 0/4–20 mA analogue input bipolar: -10 - +10 VDC or -20 - +20 mA 0 -10 VDC or 0/4–20 mA analogue input bipolar: -10 - +10 VDC or -20 - +20 mA 0 -10 VDC or 0/4–20 mA analogue input bipolar: -10 - +10 VDC or -20 - +20 mA Signal ground digital input digital input digital input Signal ground analogue output analogue output Signal ground digital input digital input digital input digital input digital output digital output digital input Relay...