*mydirectindustry

Catalogs
CETONI GmbH
QMIX P - PRESSU RE-MEASURIN G MODULE

QMIX P - PRESSU RE-MEASURIN G MODULE

Product catalog summary

Description
The Qmix P pressure-measuring module is designed for efficient pressure control and monitoring of system-pressure values. It features two independent ceramic pressure sensors that can be customized for various pressure ranges.

Precise Pressure Monitoring
The module offers flexibility with pressure ratings of 2, 5, 10, 20, 50, 100, and 200 bar, and housing materials of PPS or PEEK. It supports safety applications and pressure-controlled continuous flow modes. The sensor unit is easy to clean by rinsing or removing the cap.

Automation via QmixELEMENTS
When integrated with QmixELEMENTS, the module can automate pressure monitoring, shutting down pumps if critical pressure levels are exceeded or not met.

Mechanical Data
Weight: 750 g to 3 kg
Dimensions: 310 x 55 x 70 mm

Environment
Operating Temperature: 0 – 50 °C
Storage Temperature: -20 – 75 °C
Operating Humidity: 20 – 90%, non-condensing
Storage Humidity: 20 – 90%, non-condensing

Electrical Data
Peak Power Consumption: 1 W
Power Supply Voltage: 24 V DC

Interfaces
CAN: max. 1 Mbit/s
Fluidic Connections: ¼“-28 UNF

Module Performance
Pressure Sensors: 2, 5, 10, 20, 50, 100, 200 bar
Internal Volume: 115 µl for ≤50 bar, 60 µl for ≥100 bar

Wetted Parts
Sensor: AI203
Sensor Housing: PPS-GF40*/ Steel / PEEK
Seal: FKM*/ FFKM
*default configuration

Catalog excerpts

Q MIX P - P RESSURE -M EASURING M ODULE DESCRIPTION The Qmix P pressure-measuring module enables a fast and sufficient pressure control to monitor system-pressure values. Therefore the module offers two independent ceramic pressure sensors, which can be customized for different system pressure ranges. PRECISE PRESSURE MONITORING The pressure module provides you with the max. flexibility for the choice of different pressure ratings (2, 5, 10, 20, 50, 100, 200 bar) as well as housing material (PPS / PEEK). The pressure sensors can be used for safety reasons or to realize a pressure-controlled continuous flow mode. Cleaning the sensor unit is easy. Simply rinse it with a rinsing solution or remove the cap to access the sensor. AUTOMATION VIA QMIXELEMENTS In combination with QmixELEMENTS you can use Qmix P modules for pressure monitoring to shut down pumps automatically when critical pressure levels are exceeded or undercut.

Open the catalog to page 1

QMIX P - PRESSU RE-MEASURIN G MODULE

QMIX P - PRESSU RE-MEASURIN G MODULE

Catalog excerpts

All CETONI GmbH catalogs and technical brochures