HEATING ACCESSORIES Technical Specification An increasing number of applications require a pre-heating of materials or media, which will be transported by the pump equipment. Uses include the modification of physical characteristics of the relevant materials (e.g. viscosity or native conditions) or particular needs for downstream processes. Electrical Data For such applications, cetoni developed a novel extension for the NEMESYS Mid Pressure syringe pump to handle tempered liquids with the well-known precision and comfortable control software. NEMESYS mid pressure module Heating controller - QMIX TC2 Heated syringe upgrade The standard configuration consists of a NEMESYS mid pressure syringe pump, heated syringe-attachment, heating-controller (QMIX TC) as well as the heated tubing sleeve with a replaceable inner capillary. Heated tubing sleeve connection of heated syringe Equipment QMIX TC2 heated syringe (incl. valve block) heated tubing sleeve Description heating equipment controller (2 separate control channels) 1 / 2.5 / 5 / 10 ml ,SST (custom materials on request) 1/16” - 1/8” OD (replaceable inner capillary) Automated Temperature Control via QmixELEMENTS The above picture shows a complete heating enhancement setup, including a BASE 600XT (at-line configuration) to drive the heated syringe plus sleeves via the QMIX TC2. This complements the BASE 120 that provides the control for the QMIX TC2 and also drives the Qmix V and NEMESYS pump modules. The Windows-based operating software QMIXELEMENTS, offers the full and comfortable access to all control parameters of your heating equipment as well as other cetoni products. Detail of the heated syringe attachment and tubing sleeves with electrical connections to QMIX TC2 module (power – white, sensors – orange