Description
The document describes the heated syringe developed by CETONI for the neMESYS Mid Pressure syringe pump, designed to transport (pre-)heated fluids with precise flow control. The heating unit can heat the syringe and tubing material up to 200 °C in a compact space under homogeneous conditions.

Flow Performance
The heated syringe is compatible with the neMESYS mid pressure syringe pump and requires a Qmix TC2 module for temperature control. Due to high power consumption during heating, a Base 600XT can be added to the existing setup, complementing the BASE 120 that controls the Qmix TC2 and drives the syringe pumps.

Process Automation via QmixELEMENTS
The QmixELEMENTS software, based on Windows, provides full access to control parameters of the heating equipment and other CETONI products, facilitating easy automation.

Electrical Data
- Qmix TC2 Ports: 2x Heater, 4x Temperature Sensor (PT 100)
- Qmix TC2 Power: 2x 160 W
- Heated Tubing Power (per meter): max. 70 W
- Heated Syringe Power: max. 65 W

Environment
- Operating Temperature: 5 – 45 °C
- Storage Temperature: -40 – 75 °C
- Operating Humidity: 20 – 80%, non-condensing
- Storage Humidity: 20 – 80%, non-condensing

Operation
- Operating Temperature Syringe: max. 200 °C
- Operating Temperature Tubing: max. 200 °C

Equipment Data
- Syringe Volume: 2.5 / 5 / 10 ml
- Syringe Material: SST (other materials available on request)
- Heated Tubing Sleeve: 1/16” - 1/8” OD

Interfaces
- Heated Syringe: G1/8
- Heated Tubing: 1/4"-28 UNF