Leak Tester Application Software CETA Soft 2G for free! CETATEST LV - Leak testing of large-volume products The compact CETATEST LV (Large Volume) leak tester can be used for leak testing with compressed air as the test medium for directly fillable products and for test pressures up to -800 mbar or up to +200 mbar. It is suitable for integral leak testing of large-volume test parts (up to 1000 l volume). The standard turbo filling function enables rapid filling of the product. The dynamic filling phase ends automatically once the test pressure has been reached. This is followed by the stabilisation and measurement phase. System architecture Result units Real-time system 24 bit-A/D converter Pa, hPa, PSI, Pa/s, hPa/s, PSI/s, mbar•l/s, ml/min, ml/h, l/min, l/h, mmHg, mmWs, Torr 7-Zoll-Touchscreen, separate start / stop buttons Valve type Pressure ranges System monitoring Electromagnetic valve Consecutive zero results Flow-optimised pneumatics Maximum deviations Low inherent volume of the measuring Integrated protection circuits prevent damage to the test part and internal sensors. Gauge pressure: 1 % referred to full scale value Pressure loss: 1 % referred to measuring range Memory for 100,000 measurement results 64 individually parameterisable test programs with alpha-numeric program names, export / import of test programs via device interfaces or by usage of a USB storage device Pressure sensor Test mode Gauge pressure sensor Pressure decay Measurement range Turbo filling, nominal pressure optimisation, prefill, pulsing, smooth filling, free programmable electric control valve System features

Leak Tester Digitale DigitalSignalausgänge signal outputs Digitale Signaleingänge Digital signal inputs Elektrischer Steuerausgang Electrical control output Drucklufteingang Compressed air input RS-232 Schnittstelle RS-232 Interface Modul-Slot Module slot fürProfinet Profinet for Netzsschalter Power switch Testeingang Test input Prüfdruckausgang Test pressure output I/O-interface, RS-232, USB (host), Ethernet, Profinet The CETATEST LV is fully interface compatible with the CETATEST 715 LV and CETATEST 725 LV and well prepared for Industry 4.0 requirements. Pressure range: +200 mbar At least 0.5...