Flow Tester CETATEST 915-G
2Pages

Flow Tester CETATEST 915-G Flow Tester CETATEST 915-G The CETATEST 915-G is a fully automatic flow test device for the detection of untight parts. The test is automatically started after adaption of the test part. This method of operation has been developed especially for the gas industry and for reworking in the automobile industry. The pressure drop of the laminar flow element (LFE) is measured by a differential pressure sensor and converted into a flow value. Measurement ranges 10 bis 600 ml/h other ranges on request Result units ml/min, ml/h, l/min, l/h, mbar*l/s Pressure ranges 150 mbar and 600 mbar (other pressures on request) Maximum Deviations Gauge pressure: 1 % * Volumetric flow: 2 % * Test modes / test options Leak test on flow basis, zero result measurements Operating methods Direct laminar flow measurement Signal processing Fast 24-bit-A/D-Converter Real time processing of the measurement signals Processing Real time microcontroller system, 16-bit pC / 40 MHz Start function Selectable automatic start Pressure sensors Differential pressure sensor, gauge pressure sensor (test pressure) Programmable test phases Delay, filling, stabilising, measuring Adjustable threshold values Filling pressure, test part specific reject and rework levels Handling Intuitive menus, password protected user levels Parameter memory 64 individually parameterizable test programs with alpha-numeric program names, parameters of the test programs can be exported resp. imported via the test device interfaces or by usage of a USB storage device. referred to full scale value

Flow Tester CETATEST 915-G Interface for future extensions Digital signal inputs Further interfaces on request. Further functions Result statistics, indicator for service intervals, recording of parameter change, recording of measurement curves and measurement series, Dynamic Link Library (DLL) for RS-232 interface programming Power supply and power consumption 100 - 240 V AC, 47 - 63 Hz, 0.6 - 0.3 A je nach Ausbaustufe max. 60 W Compressed air supply 1.0 bar above test pressure Pneumatic connections Input (compressed air supply): 6 mm plug-in fitting Port for test part fitting for 6 x 1 mm...