CETA Leak Tester CETATEST XS - compact, fast, cost-effective
2Pages

CETATEST XS DKD tefciwA ff ]>AkhS DWKhf Leak Tester CETATEST XS - compact, fast, cost-effective The CETATEST XS is a compact, fully automatic leak tester for the detection of untight parts within the cycle time of the production process . The tester is designed for leak testing of small-volume test parts and short total testing times. It is equipped with a gauge pressure sensor, through which the leak-related pressure decay is detected during the measurement time (relative pressure method). Using the application software CETA Soft XS the parameterisation of the test programs is carried out. Measurement results and pressure variation curves can be recorded. Operating methods One-channel operation Signal processing 24-bit-A/D-Converter Valve type Multi-function block Pressure sensor Gauge pressure sensor Measurement ranges ± 2,500 Pa; ± 9,999 Pa / ± 25.0 hPa; ± 99.9 hPa (depending on the pressure range) Result units Pa, hPa (pressure decay) bar (test pressure) Pressure ranges Internal electronically regulated: -1 bar / +1 bar; 0.010 - 0.200 bar; 0.020 - 1.000 bar; 0.20 - 8.00 bar (external pressure regulation as option) Maximum Deviations Gauge pressure: 1 % * Specification for combined devices based on positive gauge pressure Pressure loss: 2 % * Test modes Pressure decay Test options Smooth filling (pressure ramp), prefilling, preventing Programmable test phases Delay, filling, stabilizing, measuring, venting, application-specific configurable, adjustable in 0.01 s-steps Test mode specific limits Fill pressure, test part specific reject and rework levels Handling Digital I/O or by PC software, remote control (optional) Parameter memory 8 test programs, parameterising via CETA PC software Languages PC software German, English, Spanish, French, Turkish, Hungarian, Vietnamese, Czech Result memory Internal ring memory (20,000 results) referred to full scale value

Leak Tester * for each result **retrievable Power supply and power consumption Test device: 24 VDC, max. 20 W External power supply: Input 100-240 VAC/47-63 Hz/1.62-0.72 A Output 24 VDC, max. 2.62 A Compressed air supply At least 2 bar resp. 1 bar above test pressure, maximum 9.5 bar + 0.5 bar resp. 50 mbar under evacuation pressure (ISO 8573-1:2010 [1:4:1]) Pneumatic connections Input (compressed air supply): 6 x 1 mm fitting Port for test part: 6 x 1 mm fitting (depending on application) Dimensions W x H x D : 280 mm x 96 mm x 250 mm Weight Approx. 4.5 kg incl. external power supply Scope...