Warrior Product Line Offering
1Pages

Features ✓ Compact Designed to IP65/IP67 Standards ✓ 900MHz Operation ✓ Designed to ICS 8 NEMA Crane Specification ✓ Eight DIP Switches Allow for Configurability The Warrior MU receiver is a low cost machine-mounted unit intended for use on industrial cranes. The Warrior MU is self-contained and preconfigured providing a pre-engineered solution for standard crane control. The Warrior MU will accept control commands from HH2S, MCB, and Warrior CB series transmitters. Warrior MU6E Features Designed to IP65/IP67 Standards ✓ 900MHz Operation ✓ Designed to ICS 8 NEMA Crane Specification ✓ Up to 48 Configurable Output Relay Contacts The Warrior MU can be mounted by utilizing the included mounting feet. The sturdy enclosure allows the Warrior MU to operate worry free in harsh weather conditions. An integral pre-wired, numbered 25-wire cable allows easy installation by following instruction drawings. The MU6E is a modular receiver intended for use in industrial systems including overhead cranes. The self-contained MU6E can be configured with various input/output modules accommodating various I/O requirements. The MU6E will accept control commands from the full range of Cervis Warrior transmitters including the multilever Warrior Console Box. The MU6E can be mounted by utilizing the included 4-bolt mounting flange. The sturdy enclosure allows the MU6Eto operate in harsh weather conditions. Additional accessories also available include antenna extension cables and integrated audible horn. Specifications Power Universal AC Module Universal DC Module Power Mounting Four wall-mounting brackets FourM4x 10mm LG. self-tapping screws Optional 2-bolt mount Environment Operating Temp Storage Temp Humidity Enclosure Dimensions Durability Mounting Radio Frequency License Modulation Antenna 906-924MHZ License Free Channel hopping DSSS External (RP-TNC) License License Free Safety Circuit Designed to ISO 13849 Cat 3 PLD Contacts Contact Rating Expansion Expansion Cards Control Relays Sixteen (16) Type Form A Contact Rating 8A Max. @ 250VAC Fused @ 5A Analog Card: 4-Independent AO channels 0-10V mode, 40mA max current 0-20mAmode, 12V max Four AI Channels 0-10V mode, 1.5Hz cutoff 0-20mA mode, 1.5Hz cutoff Warrior HH2S Handheld Remote Features ✓ 900MHz Operation ✓ Ten 2-Step Buttons ✓ Protective Rubber Bumper ✓ Auto-Shutdown on High g-Force ✓ Compact Weatherproof Design ✓ Rugged High-Impact Polymer Enclosure Haptic Feedback Vibrator Option Four LED Indicators ✓ Powered by 2-AAA Battery HH2S handheld remotes feature ten 2-step pushbuttons. Using Channel Hopping Direct Sequence Spread Spectrum (DSSS) technology at 900MHz, HH2S handheld remotes provide a robust link with a receiver in congested radio environments. These handheld remotes feature seamless association to receivers without a need to cycle power or access the receiver. Using an internal accelerometer, the handheld remote immediately deactivates following a high g-Force event. Auto-Shutdown is also available through an inactivity timer. Both features are configurable. Pushbuttons are rated at greater than 6N force to activate the first step and greater than 12N to activate Step 2. Handheld remote applications include, but are not limited to, overhead crane control, such as 3-motion/2-speed and 2-motion/2-speed. Both can include A/B transfer. Warrior MCB Handheld Remote Features ✓ Three or Four Joysticks ✓ 900MHz Operation ✓ Two Toggle Switches ✓ Four LED Indicators ✓ Powered by 4-AA Batteries ✓ Push/Pull Stop Switch Tilt Switch ✓ Channel Hopping Direct Sequence Spread Spectrum Technology (DSSS) ✓ Compact Weatherproof Design ✓ Rugged High-Impact Glass-Filled Nylon Enclosure The Warrior MCB mini console box communicates with and controls the Warrior MU base units at 900MHz using Direct Sequence Spread Spectrum technology. The MCB offers solid control in crowded radio environments with the added benefit of not requiring a license for use. The rugged enclosure and water resistant components ensure reliable operation in harsh weather environments operating in temperatures as low as -20°C to a maximum of55°C (-4°Fto131°F). MCB remote applications include, but are not limited to, overhead crane control, such as 3-motion/2-speed and 4-motion/2-speed. Both can include A/B transfer. +2.0 to +3.0V Two (2) AAA Programmable Time-Base Inactivity or High g-Force Event Environment Operating Temp -20"C to 550C (-4°F to 131°F) Storage Temp -20"C to 850C (-4°F to 185°F) Humidity 0-95% non-condensing Enclosure with Bumper Dimensions 5.37” x 2.68” x 0.92” Durability High Impact Polymer Case Polycarbonate Faceplate Impact Absorbing Bumper Radio Frequency License Antenna Modulation Transmit/Receive Battery life A Selection B Selection 906-924MHZ FCC Part 15, License Free Internal Channel Hopping DSSS Specifications Power Operating Voltage Batteries Auto-Shutdown Inactivity Shutdown Environment Operating Temp Storage Temp Humidity Enclosure Dimensions Total Weight Durability Faceplate Hardware LED Indicators TX/RX BATT Warrior CB Console Box Transmitter Features ✓Up to Seven Single-Axis, Bi-directional Levers ✓ Stepless or Up To 5-Step Control from Stepless Levers ✓ Options for Toggles, Potentiometers, Pushbuttons, and Rotary Switches for AUX functions ✓ Standard Four System Status/Diagnostic LEDs ✓Unsurpassed Durability and Environmental Sealing ✓ Shoulder Harness Standard, Optional Belt ✓ Operates Using Two C-Cell Batteries ✓ Optional 8-Character LED Display ✓900MHz Operation ✓Push/Pull Stop Switch The Warrior CB Console Box is designed for control of overhead bridge cranes. This transmitter offers up to seven single-axis, bi-directional levers for crane motions as well as toggle switches, pushbuttons, rotary switches, and potentiometers for AUX functions. Housed in an extremely durable, sealed glass-filled nylon enclosure, the Warrior CB is ready for duty in harsh environments including outdoor applications. Warrior systems operate in the 900MHz FCC Part 15 License Free radio band, 400MHz band FCC Part 90 options are also available. The bi-directional radio transmission is continuously monitored, where each message sent by the transmitter is acknowledged with a message from the receiver. Trans-mitterdiagnostic LEDs provide radio integrity, battery life, and A/B/AUX select feedback to the operator. The reliable, ergonomically designed Warrior CB unit can be paired with our Warrior MUor Warrior MU6E model receivers. Contact your Cervis sales representative to discuss your application requirements. Radio Frequency License Antenna Modulation 1.6 to 3.2VDC Four (4) AA Alkaline Tilt Switch Four Minutes Standard (Programmable) -20"C to 550C (—4°F to 131°F) -20"C to 550C (—4°F to 131°F) 0-100% 7.09” x 4.15” x 4.61” 180.3mm x 105.44mm x 117.04mm =2.50 lbs. (1.13kg) Glass-Filled Nylon Case Polycarbonate Stainless Steel Specifications Power Operating Voltage Batteries Low V Warning Auto-Shutdown Inactivity Shutdown Environment Operating Temp Storage Temp Humidity 1.9 to 3.2VDC Two (2) C-Type Alkaline (typical) 2.1V 2.0V 4-Minutes Standard (Programmable) -20"C to 550C (4°F to 131°F) -20"C to 550C (—4°F to 1850F) 0-95% Non-Condensing Transmit/Receive Battery Life A Selection B Selection Transmit/Receive Battery Life A Selection B Selection 906-924MHZ FCC Part 15, License Free Internal Channel Hopping DSSS Enclosure Material: Glass-filled Nylon Faceplate: Aluminum. Hardware: Stainless Steel Total Weight : 3.95lbs (1.8kg) Dimensions: 10.4” x 5.6” x 5.5” (263.5mm x131.5mm x 139mm) Radio Frequency 906MHz - 924MHz License FCC Part 15, license free