Engineering SpecSheet Warrior MU6E Features S Designed to IP65/IP67 Standards [’ v' 900MHz Operation S Designed to ICS 8 NEMA Crane Specification S Modular Design for Maximum Flexibility I. v' Up to 48 Configurable Output Relay Contacts it n The MU6E is a modular receiver intended for use in industrial systems including overhead bridge cranes. The MU6E is self-contained and can be configured with various input/output modules accommodating various I/O requirements. The MU6E will accept control commands from the full range of Cervis Warrior transmitters including the multi-joystick multi-axis Warrior Console Box. The MU6E can be mounted by utilizing the included 4-bolt mounting flange. The sturdy enclosure allows the MU6E to operate in harsh weather conditions. Additional accessories including antenna extension cables and integrated audible horn are also available. Frequency License Modulation Antenna 904MHz-926MHz License Free Channel Hopping (DSSS) External (RP - TNC) Safety Circuit Designed to ISO 13849 Cat 3 PLD Contacts Common, NO, NC, start contacts Contact Rating 8A Max. @ 250VAC Expansion Seven Six I/O, one power Enclosure Dimensions Durability Mounting Expansion Cards Relay Card Eight Form A Relays Two independent banks of four, 5A per bank Analog Card 4-Independent AO Channels 0-10V mode, 40mA max current 0-20mA mode, 12V max Four AI Channels 0-10V mode, 1.5Hz cutoff 0-20mA mode, 1.5Hz cutoff Warrior MU6E Receiver August 2017 55° continuous; 75°C peak tested for four hours