Catalogs >
Cervis >
SmaRT PG-XH14-DIS

SmaRT PG-XH14-DIS
2Pages

Catalog excerpts

Engineering SpecSheet PG-xH14-DIS (PG-9H14-DIS and PG-2H14-DIS Pistol Grip Remotes) Features S License-Free Operation S PG-9H14-DIS 900MHz@10mW RF Power S PG-2H14-DIS 2.4GHz@100mW RF Power S Direct Sequence Spread Spectrum Technology (DSSS) S Comfortable Weatherproof Pistol Grip Design S Four Character LED Display S Four Status/Diagnostic LEDs S 4-AA Alkaline Battery Power S Dedicated M-Stop S Glove-Accessible Switches S Four Handle-Embedded Magnets S Umbilical Connection Option S J1939 CAN Capable The SmaRT™ PG-xH14-DIS pistol grip remotes are designed for traditional and non-traditional mobile applications. Capable of activating digital and trigger-control-pulse-width-modulated proportional outputs of SmaRT base units, the PG-xH14-DIS provides single-handed operation in a comfortable layout. Using Direct Sequence Spread Spectrum (DSSS) wireless technology at 900MHz or 2.4GHz, the SmaRT pistol grip remote provides a robust link with SmaRT base units in congested radio environments. The four character LED display provides positive feedback of base unit activity and aids in PWM use and calibration. SmaRT remotes feature seamless association to SmaRT base units without the need to open unit enclosures. The umbilical option allows a PG-xH14-DIS remote to directly connect to base units. The rugged weatherproof Pistol Grip enclosure allows the unit to operate worry free in harsh weather conditions. Four powerful handle-embedded magnets allow the remote to be securely attached to ferrous surfaces to prevent misplacing the unit while not in use or to provide a stable working platform when desired. LED Indicators and Display TX (Green) Transmitting messages Switch active Blinking Steady RX (Amber) Blinking Steady 8 Blinks Error (Red) Steady Flashing Display Batteries Four AA Alkaline Battery Life =175 to 200 hours Low V Power Down 1.9VDC Auto-Power Down 10 minutes of inactivity (default) Radio Frequency RF Power License Modulation Antenna Environment Operating Temp -20°C to 55°C (-4°F to 131°F) Storage Temp -40°C to 55°C (-40°F to 131°F) Humidity 0 to 100% Control Functions Switches Six toggles, one pushbutton, up to 12 Functions One trigger proportional controller One oversized stop Receiving messages Output of interest active One for each channel scan before association is made (1.6 sec. total) Error detected; switch conflict Switch conflict, switch held by user when turned on Four (4) character Battery (Amber) Flashing Low battery indication Enclosure Dimensions mm: 230.59x133.93x146.92 inch: 9.08 x 5.27 x 5.78 Durability High Impact Polymer SmaRT PG-xH14-DIS Pistol Grip Remote March 4, 2015

Open the catalog to page 1

Engineering SpecSheet Associate Mode All Cervis systems are associated (communications are pre-set) at the factory. However, a SmaRT PG-xH14-DIS can be associated to a SmaRT base unit in the field when desired. To associate there must be a clear line-of-sight between the handheld and the base unit, and both units must be OFF (powered down). Do not operate the trigger while associating. 1. Stand near to the base unit with the pistol-grip remote OFF and power removed from the base unit (disconnect the source power OFF). 2. Release the STOP button on the handheld by pulling up. 3. Push and...

Open the catalog to page 2

SmaRT PG-XH14-DIS 2Pages

Catalog excerpts

All Cervis catalogs and technical brochures

SmaRT PG-XH14-DIS
2Pages