Catalogs >
Cervis >
PG-xH14 Pistol Grip Remote

PG-xH14 Pistol Grip Remote
2Pages

Catalog excerpts

Engineering SpecSheetPG-xH14 (PG-9H14 and PG-2H14 Pistol Grip Remotes) Features PG-9H14 900MHz@10mW/ PG-2H14 2.4GHz@100mW/ RF Power License-Free Operation Direct Sequence Spread Spectrum Technology Comfortable Weatherproof Pistol Grip Design Powered by Four AA Alkaline Batteries Dedicated M-Stop Button S Four Status/Diagnostic LEDs Glove-Accessible Switches S Four Handle-Embedded Magnets Umbilical Connection Option S J1939 CAN Capable The SmaRT™ PG-xH14 pistol grip remotes are designed for traditional and non-traditional mobile applications. Capable of activating digital and trigger-control-pulse-width-modulated proportional outputs of SmaRT base units, the PG-xH14 provides single-handed operation in a comfortable layout. Using direct sequence spread spectrum (DSSS) wireless technology at 900MHz or 2.4GHz, the SmaRT pistol grip remote provides a robust link with SmaRT base units in congested radio environments. The SmaRT PG-xH14 features seamless association to a SmaRT base unit without the need to open the case of either unit. The umbilical option allows a PG-xH14 remote to directly connect to base units. The rugged weatherproof Pistol Grip enclosure allows the unit to operate worry free in harsh weather conditions. Four handle-embedded magnets allow the remote to be securely attached to ferrous surfaces to help prevent misplacing the unit while not in use. Transmitting messages Switch active Receiving messages Output of interest active One for each channel scan before association is made (1.6 sec. total) Batteries Four AA Alkaline Battery Life =175 to 200 hours Low V Power Down 1.6 VDC Auto-Power Down 10 minutes of inactivity (default) Radio Frequency RF Power License Modulation Antenna Indicators (4 LEDs) TX (Green) Blinking Steady RX (Amber) Blinking Steady 8 Blinks Error (Red) Steady Error detected; switch conflict Flashing Switch conflict, switch held by user when turned on Environment Operating Temp -20°C to 55°C (-4°F to 131°F) Storage Temp -40°C to 55°C (-40°F to 131°F) Humidity 0 to 100% Control Functions Switches 7 switches, up to 14 Functions; 1 proportional trigger controller 1 oversized stop Battery (Amber) Flashing Low battery indication Enclosure Dimensions mm: 230.59x133.93x146.92 inch: 9.08 x 5.27 x 5.78 Durability High Impact Polymer SmaRT PG-xH14 Pistol Grip Remote February 17, 2015

Open the catalog to page 1

Engineering SpecSheet Associate Mode All Cervis systems are associated (communications are pre-set) at the factory. However, a SmaRT PG-xH14 can be associated to a SmaRT base unit in the field when desired. To associate there must be a clear line-of-sight between the handheld and the base unit, and both units must be OFF (powered down). Do not operate the trigger while associating. 1. Stand near to the base unit in a clear direct line-of-sight with the handheld while both handheld and base unit are OFF. 2. Release the MACHINE STOP, move any momentary toggle up or down and then allow it to...

Open the catalog to page 2

PG-xH14 Pistol Grip Remote 2Pages

Catalog excerpts

All Cervis catalogs and technical brochures

PG-xH14 Pistol Grip Remote
2Pages