Catalogs >
Cervis >
PG-xH12JS Pistol Grip Remote

PG-xH12JS Pistol Grip Remote
2Pages

Catalog excerpts

Engineering SpecSheet PG-xH12JS Pistol Grip Remotes Features S PG-9H12JS 900MHz@10mW/ PG-2H12JS 2.4GHz@100mW/ RF Power License-Free Operation S Direct Sequence Spread Spectrum Technology S Three 3-Position Toggles S Two Dual Axis Joysticks S Dedicated M-Stop Button S Four Status/Diagnostic LEDs S Glove-Accessible Switches S Four Handle-Embedded Magnets S Umbilical Connection Option S J1939 CAN Capable S Powered by 4-AA Alkaline Batteries S Comfortable Weatherproof Pistol Grip Design The SmaRT™ PG-xH12JS pistol grip remotes are designed for traditional and non-traditional mobile applications. Capable of activating digital and joystick trigger-control-pulse-width-modulated proportional outputs of SmaRT base units, the PG-xH12JS provides single-handed operation in a comfortable layout. Using direct sequence spread spectrum (DSSS) wireless technology at 900MHz or 2.4GHz, the SmaRT pistol grip remote provides a robust link with SmaRT base units in congested radio environments. The SmaRT PG-xH12JS features seamless association to a SmaRT base unit without the need to open the case of either unit. The umbilical option allows a PG-xH12JS remote to directly connect to base units. The rugged weatherproof Pistol Grip enclosure allows the unit to operate worry free in harsh weather conditions. Four handle-embedded magnets allow the remote to be securely attached to ferrous surfaces to help prevent misplacing the unit while not in use. Specifications Power Vin Batteries Battery Life +3.0VDC nominal Four AA Alkaline =175 to 200 hours Auto-Power Down Radio Frequency RF Power License Modulation Antenna Environment Operating Temp Storage Temp Humidity Indicators (4 LEDs) TX (Green) Blinking Steady RX (Amber) Blinking Steady Error (Red) Steady Flashing Transmitting messages Switch active Receiving messages Output of interest active Error detected; switch conflict Switch conflict, switch held by user when turned on Battery (Amber) Flashing Enclosure Controls Switches Three 3-position toggles, two dual axis joysticks One trigger (proportional controller) One oversized stop Weight Durability 1.22kg (2.7lbs) High Impact Polymer SmaRT PG-xH12JS Pistol Grip Remote February 25, 2015

Open the catalog to page 1

Engineering SpecSheet Associate Mode All Cervis systems are associated (communications are pre-set) at the factory. However, a SmaRT PG-xH12JS can be associated to a SmaRT base unit in the field when desired. To associate there must be a clear line-of-sight between the handheld and the base unit, and both units must be OFF (powered down). Do not operate the trigger while associating. 1. Stand near to the base unit in a clear direct line-of-sight with the handheld while both handheld and base unit are OFF. 2. Release the MACHINE STOP, move any switch to its maximum position and then allow it...

Open the catalog to page 2

PG-xH12JS Pistol Grip Remote 2Pages

Catalog excerpts

All Cervis catalogs and technical brochures

PG-xH12JS Pistol Grip Remote
2Pages