Serie UTM-E Universal Testing Machines Rev. 04-2024-EN Product Information Universal, servocontrolled, electro-mechanical, computerized testing machines to perform load, displacement or strain-controlled tests in in tension, compression, bending, and flexure with appropriate accessories, optional and/or customized on request. The machine is suitable for testing medium and low strength specimens in various areas of use such as quality control in industry, certification of materials by Accredited Testing Laboratories, research and development of new technologies in Universities and Research Centers, education in Technical Institutes. Characteristics Frame with 2 opposite columns, with double test space (tension and compression), movement driven by two high precision ball screws, with external covering made by aluminum profile sealed with extendable bellows to ensure cleanliness of the mechanical transmission components. The lower base accommodates the mechanical transmission system and the fast and silent brushless motor unit. Manual, pneumatic, hydraulic or special and dedicated jaw units are available for tensile testing, depending on the required configuration. The machine is suitable for performing tensile tests on round and flat specimens, as well as FRP, FRCM, CRM, FRC, geotextiles, geogrids, fabrics and many others. Accessories are also available for performing compression, bending and flexural tests. CERMAC s.r.l. Via del lavoro 8, 20060 Pozzo d’Adda MI, Italy - Tel. (+39) 02 9098 1113 - [email protected] www.cermacsrl.com

Serie UTM-E Universal Testing Machines Rev. 04-2024-EN Machine Control System – Testing XE The Testing Computerized Control System consists of a state-of-the-art datalogger (user/machine interface) equipped with an electronic module with TCP/IP network interface, analog and digital inputs and outputs of IN and OUT signals, firmware and software. All signals related to the physical quantities coming from the machine’s electronic sensors (load cell and displacement transducer), as well as those of electronic strain gauges (optional) applied to the sample for direct measurements of material deformation,...

Serie UTM-EUniversal Testing Machines Rev. 04-2024-EN ASTM A615 ASTM A370 ASTM E4 ASTM E8 ASTM E9 ASTM E2658 UNI EN ISO 6892 UNI EN ISO 6892-2 UNI EN ISO 7438 UNI EN ISO 7500-1 UNI EN 15630 UNI EN 10080 UNI EN 2561 Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement Standard Test Methods and Definitions for Mechanical Testing of Steel Product Standard Practices for Force Verification of Testing Machines Standard Methods for Tension Testing of Metallic Materials Standard Methods of Compression Testing of Metallic Materials at Room Temperature Standard Practices for Verification of...

Serie UTM-E Universal Testing Machines Rev. 04-2024-EN Optional accessories Accessories are available for every testing requirement: grips for tensile tests on round and flat specimens, dedicated grips for testing fibre-reinforced materials (FRP, FRCM, CRM), grips for geotextiles, geogrids and geotextiles, thread adapters for turned specimens, manual, automatic or video extensometers, compression and flexure fixtures. Jaws are available with manual, pneumatic or hydraulic actuation. Video extensometer Horizontal clamping Hydraulic grips fixture for geogrids and nets Test set-up for performing...