STEEL TOOLSMarking-off machine Rev. 02-2023-EN The marking-off machine allows quick and easy marking of specimens, before being subjected to tensile test, by engraving permanent reference marks to define the original base length (Lo). At the end of the tensile test, by matching the two halves of the specimen, it will be possible to calculate the elongation at failure load and, if necessary, the Agt by manual method. Product features The unit consists of a burin-holding roller and a pair of workpiece clamping jaws, operated manually by means of a hand crank or by a motor in the motorized version. The burins arranged along the roller and a sliding device in the base allow markings to be made at a selectable distance of multiples of 5 mm, from 5 to 20 mm, equidistant from each other. Technical features Via del lavoro 8, 20060 Pozzo d'Adda MI, Italy - Tel. (+39) 02 9098 1113 - [email protected] www.cermacsrl.com

STEEL TOOLS Marking-off machine Rev. 02-2023-EN Manual Marker. Motorized Marker Pack of n. 26 spare indenters. Manual Marker Each marker consists of a shaped handle and two burins at a predetermined distance from each other. By placing the tips of the burins on the specimen, and hitting the handle (short upper side), it is possible to mark the shaped specimen. Different markers are available for different original gage lengths. Models of manual marker V04050101 - Marker gage length 16 mm. V04050301 - Marker gage length 24 mm. V04050501 - Marker gage length 30 mm. V04050701 - Marker gage length...