Group: CERATIZIT GROUP
Catalog excerpts
New products for machining technicians ZSG-4 The new centric vice ZSG-4 is available with jaw widths 80, 125 and 160 mm. With this mechanical direct clamping the drive spindle runs within a closed system and is therefore protected against dirt and chips. The force configuration is carried out directly, without booster, purely on the torque. 27–29 The new 6-way jaw system is available for the H5G and ZSG-4 clamping systems, in jaw width 125 mm. For long reach applications that generate high lateral forces, the four side jaws provide a secure grip and allow complete machining of the part in one set-up. 15+29 Programme Extensions Clamping Towers The tombstones with 500 x 500 mm base plate are now available with 1000 mm height permitting more clamping area and greater secure component volume. 56–6
Open the catalog to page 1Workpiece clamping Introduction MNG Zero Point System Overview 2 Clamping Systems Overview 3 WNT Clamping System Toolfinder 4+5 WNT Clamping Variants Toolfinder 6 System Jaws Overview 66-73 General Jaws Overview 74-81 Clamping Levers Overview 90+91 WNTMASTERTOOL Premium quality tools for high performance. The premium quality tools from the WNT Mastertool Performance product line have been designed for specific applications and are distinguished by their outstanding performance. If you make high demands on the performance of your production and want to achieve the very best results, we...
Open the catalog to page 2Workpiece clamping Clamping Systems Overview Clamping Systems Overview Single clamping vice ĉĉ power booster systems NCG, HDG and H5G fixed jaw as reference high repeatability High precision and force amplification symmetrical clamping very good accessibility for 5-sided machining part datum always centered high repeatability High process security with encapsulated system Faster set up times multifunctional use optimum utilization of the machine table high repeatability Increased machine uptime Zero point clamping system Zero point clamping system grid plate Tombstones
Open the catalog to page 3Workpiece clamping WNT Clamping System Toolfinder NCG 5A Single clamping vice Centric vice Multiple vice 160° quick clamping rapid installation and removal of the spindle assembly quick span adjustment 160° quick clamping rapid installation and removal of the spindle assembly with standard jaws 160° quick clamping for 5 axis machining quick span adjustment fast handle clamping 5 axis high power vice 100% encapsulated fast handle clamping 5 axis high power vice 100% encapsulated low height 100% encapsulated compact and precise fixed zero point hydraulic version also available mechanical...
Open the catalog to page 4Workpiece clamping cubic workpieces round workpieces
Open the catalog to page 5Workpiece clamping Zero Point Clamping System All round plate for all machine tables Increased machine uptime Drilling machine vice Clamping Towers Zero point clamping system grid plate WNT Clamping Variants Toolfinder
Open the catalog to page 6Workpiece clamping Single vice ■ fast 160° lever clamping ■ rapid installation and removal of the spindle assembly ■ S = powerstroke Scope of supply: NC-quick vice, including 4 clamping claws, 2 standard reversible jaws (one side smooth, one side serrated), clamping levers including operating accessories, 1 set of covers, without clamping screws. WNT vice guide Underside Dimensions 12 Specific accessories 66-73 General accessories 74 MNG zero point clamping system 49
Open the catalog to page 7Workpiece clamping Single vice ■ fast 160° lever clamping ■ rapid installation and removal of the spindle assembly ■ S = powerstroke ■ simple raw part clamping ■ free positioning of the 6-face reversible jaw which can be found in the accessories Scope of supply: NC quick vice (Base type NCG) with 1 fixed adapter plate and 1 pendulum jaw, clamping lever including operating accessories, cover plates, 4 clamping brackets, without 6-face reversible and grip jaws. WNT vice guide Underside Dimensions 12 Specific accessories 66-73 General accessories 74-93 MNG zero point clamping system 49-55
Open the catalog to page 8Workpiece clamping Single vice ■ fast 160° lever clamping ■ rapid installation and removal of the spindle assembly ■ S = powerstroke ■ ideally suited to 5 axis machining due to optimum accessibility ■ Reversible jaws for clamping range extension ■ 100 mm version has two slots for mounting the fixed jaw ■ 125 mm version has three slots for mounting the fixed jaw ■ Vice with longitudinal and transverse grooves 20 H7 and dowel holes 0 12 F7 / 100 mm and 0 16 F7 / 125 mm Scope of supply: NCG quick clamping vice incl. 2 high base jaws, 2 ‘grip‘ stepped jaws 5 mm, 1 clamping lever, 4 clamping...
Open the catalog to page 9Workpiece clamping Single vice WNTMASTERTOOLClamping Tower - 4V ■ fast 160° lever clamping ■ rapid installation and removal of the spindle assembly ■ vertical unit with 4 NCG vices bolted directly to a connecting block and mounted on a base plate Scope of supply: 1 lever, 1 lifting eye, cover plates WNT vice guide Underside Dimensions 12 Specific accessories 66-73 General accessories 74-93 MNG zero point clamping system 49-55
Open the catalog to page 10Workpiece clamping Single vice
Open the catalog to page 11Workpiece clamping Single vice NCG underside dimensions Base width 100 mm NCG
Open the catalog to page 12Workpiece clamping Single vice ■ Crank handle quick clamping ■ Vice with quick span adjustment ■ 100% encapsulated ■ Vice with longitudinal and transverse grooves 20 H7 and alignment holes 0 12 F7 Scope of supply: Vice including 4 clamping claws, clamping handle and keys but without jaws. ■ base plate available in long version with the desired hole pattern on request. The H5G 125 mm can be extended by a maximum of 250 mm with 2 extensions. The extension results in approximately 10% loss of clamping force. WWT vice guide Underside Dimensions 17 Specific accessories 66-73 General accessories...
Open the catalog to page 13Workpiece clamping Single vice ■ Crank handle quick clamping ■ Vice with quick span adjustment ■ 100% encapsulated ■ Length F = 300 mm with 0 25 H7 centering ■ Length F = 265 mm with 0 32 H6 ■ Vice with longitudinal and transverse grooves 20 H7 and alignment holes 0 12 F7 Scope of supply: Vice including 4 clamping claws, clamping handle and keys but without jaws. ■ base plate available in long version with the desired hole pattern on request. The H5G-S 125 mm can be extended by a maximum of 250 mm with 2 extensions. The extension results in approximately 10% loss of clamping force. WWT vice...
Open the catalog to page 14All CERATIZIT CUTTING TOOLS catalogs and technical brochures
-
UP2DATE January 2021
48 Pages
-
The Catalogue
1993 Pages
-
High Dynamic Turning with FreeTurn
101 Pages
-
Turning Tools
12 Pages
-
New grades CTCM120 and CTCM130
164 Pages
-
Breaks All Records
174 Pages
-
Clamping
34 Pages
-
Milling
44 Pages
-
Turning
316 Pages
-
Threading
82 Pages
-
Drilling
57 Pages
-
THE TOOL SELECTION
570 Pages
-
Accessories
46 Pages
-
Adapters
234 Pages
-
Milling tools with indexable inserts
212 Pages
-
Solid Carbide milling cutters
364 Pages
-
HSS Milling Cutters
48 Pages
-
Miniature turning tools
64 Pages
-
MonoClamp
128 Pages
-
Programme Extension
32 Pages
-
Thread turning
48 Pages
-
Taps and thread formers
118 Pages
-
BluFlex 2 - hi.flex
56 Pages
-
REAMAX TS
77 Pages
-
KUB
58 Pages
-
WTX
138 Pages
-
WNT
55 Pages