Group: CERATIZIT GROUP
Catalog excerpts
New products for machining technicians REAMAX TS ▲▲ maximum flexibility and efficiency up to Ø 65.00 mm ▲▲ up to 5xD ▲▲ can be adjusted for the smallest tolerances and for wear compensation Fullmax high-performance reamers solid carbide high-performance reamers type UNI, VA, K, ALU and H maximum efficiency in all materials available as standard H7, as 1/100, and as configurable version REAMAX extension ▲▲ extension of the proven REAMAX reaming system ▲▲ new cutting edge geometries and coatings Monomax extension ▲▲ extension of the proven Monomax reamers ▲
Open the catalog to page 1Solid carbide drilling Indexable insert drilling Reaming and Countersinking Spindle Tooling Taps and thread formers Circular and Thread Milling Thread turning Solid drilling and bore machining Turning Tools Grooving Tools Miniature turning tools HSS Milling Cutters Solid Carbide milling cutters Tool Clamping Milling tools with indexable inserts Material examples and article no. index
Open the catalog to page 2Reaming and Countersinking Introduction Contents overview - Countersinks 6 Product range - Reamers Solid carbide - High speed reamers 7-28 Solid carbide - Reamers 29-31 Product range - Countersinks 40-49 Technical Information Cutting Data 50-70 REAMAX TS assembly and operating instructions 71+72 Problems / possible causes / solutions 73 Tolerance classes covered with 1/100 reamer 75 KOMET \ Performance Premium quality tools for high performance. The premium quality tools from the KOMET Performance product line have been designed for specific applications and are distinguished by their...
Open the catalog to page 3Toolfinder – Reaming Toolfinder – Reamers Solid carbide high-speed reamers ▲▲ highest economical machining due to very high cutting ▲▲ suitable for large and medium volumes. Solid carbide reamers ▲▲ significant increase in tool life at higher cutting ▲▲ suitable for large, medium and low volumes. HSS reamers ▲▲ universal, cost effective reamer for flexible single part production. ▲▲ suitable for single part production. Overview of solid carbide high-speed reamers 1 Fullmax Monomax MultiChange REAMAX REAMAX TS
Open the catalog to page 4Toolfinder - Reaming Toolfinder - Reamers REAMAXTS ▲ highly flexible and economical replaceable head system ▲ all common materials ▲ can be adjusted in pm range exchange head system, optimised for use with air mist coolant (MMS) face and taper contact giving run out accuracy < 2 pm Solid carbide -HSS - Reamers Solid carbide - High speed reamers ▲ flexible quick change system for reaming, countersinking and chamfering ▲ face and taper contact giving run out accuracy < 5 pm ▲ stable holder in solid carbide and steel, from short to long ▲ high-speed reamer for universal use ▲ extremely...
Open the catalog to page 5Contents overview – Countersinks Indexable Insert Counterbore Tool Steel Stainless steel Cast iron Non-ferrous metals Heat-resistant Hardened materials Point angle Tool type Countersinks Overview HSS – Counterbores Solid Carbide Countersinks N
Open the catalog to page 7KOMET \ Performance Reaming and Countersinking Exchange head system KOMET no. Lead Lead angle Grade / coating Article no. Application DST DBG-P DBG-P DBC DBC DST DBG-P TiN DST Through hole Through hole Blind hole Through hole Blind hole Blind hole Blind hole Blind hole Through hole Stainless steel Nodular cast iron
Open the catalog to page 8REAMAX TS - Replaceable reaming heads ▲ up to tolerance class IT 6 with absolute process security, from the first hole ▲ precise repeatability < 3 pm ▲ high precision grind for maximum quality ▲ can be adjusted for the smallest hole tolerances ▲ interface enables head change in the machine ▲ retraction from the hole at 3-4 times the cutting feed rate ▲ KLG = coupling size Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys Hardened materials 1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 20 working days / Minimum order 2...
Open the catalog to page 9Exchange head system REAMAX TS - Replaceable reaming heads ▲ up to tolerance class IT 6 with absolute process security, from the first hole ▲ interface enables head change in the machine ▲ precise repeatability < 3 pm ▲ retraction from the hole at 3-4 times the cutting feed rate ▲ high precision grind for maximum quality ▲ KLG = coupling size ▲ can be adjusted for the smallest hole tolerances Steel Stainless steel Cast iron Non ferrous metals Heat resistant alloys Hardened materials 1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 20 working...
Open the catalog to page 10REAMAX TS - Holder ▲ KLG = Coupling Size Supply details: Complete holder incl. pull stud but without exchangeable head Do not heat shrink tools! Reamax TS pull stud Spare parts Article no.
Open the catalog to page 11REAMAX TS - Holder ▲ KLG = Coupling size ▲ adjustment inside the machine ▲ alignable DAH Zero holder for correction of concentricity error ▲ DAH Zero holder is pre-loaded and set to a runout of < 0.005 mm Supply details: Complete holder incl. pull stud but without exchangeable head Do not heat shrink tools! Assembly instructions can be found on
Open the catalog to page 12Exchange head system REAMAX - Selection guide 0 12,5-40 mm KOMET no. Lead Lead angle New grade / coating Old grade / coating Article no. Application Preferred type available Through hole-Blind hole Stainless steel Grey cast iron / alloyed nodular cast iron (0.7661) and vermicular cast iron (5.2200) EiE Nodular cast iron Copper, brass, bronze Tempered steel Main application Additional range of application
Open the catalog to page 13Reaming and Countersinking Exchange head system optimised for application with minimum quantity lubrication (MMS) retraction from the hole at 3-4 times the cutting feed rate KLG = coupling size KOMET \ Performance ▲ up to tolerance zone IT 7 with absolute process safety, from the first hole ▲ ▲ maximum radial run-out accuracy thanks to precision ground taper location ▲ Stainless steel • Heat resistant alloys Hardened materials • 1) Not available ex stock, articles are non-returnable and cannot be exchanged / Delivery time 25 working days / Minimum order 2 pieces vc Page 55-57 2) Not...
Open the catalog to page 14REAMAX - Holder ▲ KLG = Coupling size Supply details: Tool holder fitted with clamp and hexagonal key, but without replaceable head Do not heat shrink tools! Spare parts DC DCONMS h6 Article no. 40 950 ... £ Q Draw bolt @ Draw bar (3 Circlip
Open the catalog to page 15All CERATIZIT CUTTING TOOLS catalogs and technical brochures
-
UP2DATE January 2021
48 Pages
-
The Catalogue
1993 Pages
-
High Dynamic Turning with FreeTurn
101 Pages
-
Turning Tools
12 Pages
-
New grades CTCM120 and CTCM130
164 Pages
-
Breaks All Records
174 Pages
-
Clamping
34 Pages
-
Milling
44 Pages
-
Turning
316 Pages
-
Threading
82 Pages
-
Drilling
57 Pages
-
THE TOOL SELECTION
570 Pages
-
Workpiece clamping
93 Pages
-
Accessories
46 Pages
-
Adapters
234 Pages
-
Milling tools with indexable inserts
212 Pages
-
Solid Carbide milling cutters
364 Pages
-
HSS Milling Cutters
48 Pages
-
Miniature turning tools
64 Pages
-
MonoClamp
128 Pages
-
Programme Extension
32 Pages
-
Thread turning
48 Pages
-
Taps and thread formers
118 Pages
-
BluFlex 2 - hi.flex
56 Pages
-
KUB
58 Pages
-
WTX
138 Pages
-
WNT
55 Pages