Group: CERATIZIT GROUP
Catalog excerpts
CE RATIZ IT NEW DEVELOPMENTS AND PRODUCT ENHANCEMENTS DURABLE | RELIABLE | with the innovative Dragonskin coating for the best performance OOMPLCTEE New grades CTCM120 and CTCM130 * with the innovative Dragonskin coatin ... AND SOME MORE DRAGONSKIN PRODUCTS ▲ WTX Feed BR ▲ New grade in indexable insert milling CTCM245 ▲ MonsterMill PCR-ALU ▲ and much more TEAM CUTTING TOOLS KieriK CERATIZIT is a high-technology engineering group specialised in cutting tools and hard material solutions. Tooling the Future
Open the catalog to page 1Placing your order is quick and easy E-Mail info.uk@ceratizit.com It couldn’t be easier Ordering via the Online Shop http://cuttingtools.ceratizit.com On-site technical support Your Local Technical Sales Engineer Your customer number
Open the catalog to page 2Dragonskin – The coatings for the highest performance We have focused all our innovative strength and expert knowledge in powder metallurgy on one particular objective: developing a tool coating that allows you as a customer to achieve an unprecedented level of performance in machining. We have succeeded in our efforts with the Dragonskin coating technology. This technology offers the highest degree of protection against external influences and effectively prevents premature tool wear. The virtually impenetrable layer has been specially developed for the toughest requirements and can cope...
Open the catalog to page 4Dragonskin products Solid carbide drilling 24–27 WTX – short step drill Solid Carbide milling cutters 94–104 MonsterMill – plunge milling cutter with chip breaker Milling tools with indexable inserts 114–127 XDKT inserts for the MaxiMill
Open the catalog to page 5performance turning in stainle materials are here
Open the catalog to page 6Dragonskin – new grades with the high-performance coating technology from CERATIZIT Always the right solution for machining austenitic, stainless steels. In addition to the established CTPM125, two new grades now round off our product range: the more wear-resistant CTCM120 and the tougher CTCM130. Thanks to the Dragonskin coating, both grades are high performers and process-secure. ▲▲ Tough carbide grade for interrupted cuts ▲▲ Guaranteed process security ▲▲ For lower cutting speeds and unstable conditions Wear-resistant grade for austenitic steels High cutting speeds For a smooth cut...
Open the catalog to page 7▲ CTCM120 - highly wear-resistant grade for high cutting speeds High cutting speed and longer service life increases productivity ▲ CTPM125 - universal grade for all applications, including interrupted cuts Universal application with high reliability and outstanding performance ▲ CTCM130 - tough grade for interrupted cuts and difficult conditions For maximum process security and reduction of the scrap rate
Open the catalog to page 8The complete range for austenitic, stainless steels is characterised not only by the precise coordination of the grades but also by the geometric consistency between the chip breakers. You can choose between three (negative inserts) or two (positive inserts) chip breakers depending on your application. Available in all three grades! Overview of chip breakers – negative inserts For the finishing of stainless steels ▲▲ Continuous cut ▲▲ High surface quality ▲▲ Good chip control First choice for stainless machining ▲▲ Good chip control ▲▲ Low burr formation ▲▲ Low cutting forces ▲▲ Low...
Open the catalog to page 9Drill reamer with 3 effective cutting edges makes for a short working process Further information on the product can be found on page 24–27 Spot drilling, drilling and reaming to a tolerance of H7 in just one operation? The WTX Feed BR drill reamer enables you to do just that. With this exciting new development, we are once again responding to the main requirements presented to us by the machining market, namely to continuously streamline and improve our customers’ production processes taking into account new materials and machining methods. Decades of experience in the development of...
Open the catalog to page 10Increased cylindricity and improved roundness of the hole Significantly narrower tolerance field of the holes produced Higher cutting speeds thanks to the three effective cutting edges Improved centring and positioning properties Universal drill reamer Specially designed for steel and cast iron machining Lower cutting forces Good surface quality can be obtained DPX14S – Dragonskin coating: TiAlN nanolayer coating Coefficient of friction (dry, against steel) = 0.35 Maximum application temperature: 1000 °C 3 effective cutting edges increase cylindricity and improve the roundness of the holes...
Open the catalog to page 11KUB Pentron CS Drilling to Ø 96 mm – now anything is possible! Cartridge solution with tried-and-tested SOGX indexable inserts ▲▲ A certain diameter range can be covered with a holder and a suitable internal cartridge ▲▲ The external cartridge must be adapted to the nominal outer diameter ▲▲ Existing SOGX indexable inserts from the standard portfolio ▲▲ Universal application, powerful, specialised Modular System Process-secure, reliable Interchangeable Minimises tool costs Basic element Burnished, wear-resistant KUB Pentron base holder in the accustomed high quality from KOMET Improved...
Open the catalog to page 12THE ENTIRE PENTRON FAMILY ABS Drill with ABS connection The ABS connection from KOMET is a modular coupling system for rotating tools and stationary tools, and offers a number of advantages, such as improved force transmission. Drill with cartridge system Process-secure, powerful and reliable system for creating large holes with a diameter of up to 96.00 mm. It has a modular design and consists of a base body, an internal cartridge and an external cartridge. A certain diameter range can already be covered with a holder and a suitable internal cartridge. Cylindrical shank with clamping flat...
Open the catalog to page 13The new benchmark for machining high-alloy steels The new CTCM245 grade features an optimised coating and substrate combination that has been specially developed for machining high-alloy steels. As a user, you benefit from high cutting speeds and excellent results in the dry machining of the following materials: ▲▲ Materials containing chromium (tool steels) ▲▲ Martensitic, stainless steels ▲▲ High-alloy, austenitic, stainless steels The special properties of the grade make it suitable for dry machining, which means that thermal shocks can be effectively prevented. The CTCM245 also has a...
Open the catalog to page 14All CERATIZIT CUTTING TOOLS catalogs and technical brochures
-
UP2DATE January 2021
48 Pages
-
The Catalogue
1993 Pages
-
High Dynamic Turning with FreeTurn
101 Pages
-
Turning Tools
12 Pages
-
Breaks All Records
174 Pages
-
Clamping
34 Pages
-
Milling
44 Pages
-
Turning
316 Pages
-
Threading
82 Pages
-
Drilling
57 Pages
-
THE TOOL SELECTION
570 Pages
-
Workpiece clamping
93 Pages
-
Accessories
46 Pages
-
Adapters
234 Pages
-
Milling tools with indexable inserts
212 Pages
-
Solid Carbide milling cutters
364 Pages
-
HSS Milling Cutters
48 Pages
-
Miniature turning tools
64 Pages
-
MonoClamp
128 Pages
-
Programme Extension
32 Pages
-
Thread turning
48 Pages
-
Taps and thread formers
118 Pages
-
BluFlex 2 - hi.flex
56 Pages
-
REAMAX TS
77 Pages
-
KUB
58 Pages
-
WTX
138 Pages
-
WNT
55 Pages